ADIN1300BCPZ-R7 datasheet(77/79 Pages) AD

77 / 79 page

Data Sheet

ADIN1300

Rev. 0 | Page 77 of 79

Subsystem LED_0 Pin Override Control Register

Address: 0xFF41, Reset: 0x0000, Name: GE_IO_LED_A_OR_CNTRL

This register allows the default function of the LED_0 pin to be overridden.

Table 126. Bit Descriptions for GE_IO_LED_A_OR_CNTRL

Bits

Bit Name

Description

Reset

Access

[15:4]

RESERVED

Reserved.

0x0

[3:0]

GE_IO_LED_A_OR_CNTRL

This bit field allows the default function of the LED_0 pin to be overridden.

0x0

R/W

1111: LED_0.

1110: LED_0.

1101: LED_0.

1100: LED_0.

1011: LED_0.

1010: LED_0.

1001: reserved.

1000: reserved.

0111: LED_0.

0110: TX_ER.

0101: COL.

0100: CRS.

0011: receive start of packet indication.

0010: transmit start of packet indication.

0001: link status.

0000: default function, LED_0. When configured for MII MAC interface with EEE

advertisement disabled from the hardware configuration pins, the default function

is COL. When configured for MII MAC interface with EEE advertisement enabled

from the hardware pin configuration, the default function is TX_ER. In all other

cases, the default is LED_0.

ADIN1300BCPZ-R7 数据表(PDF) 77 Page - Analog Devices

ADIN1300BCPZ-R7 数据表(HTML) 77 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79

数据表下载