| 数据搜索系统,热门电子元器件搜索 |
|
PCF8536AT 数据表(PDF) 12 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
PCF8536AT 数据表(HTML) 12 Page - NXP Semiconductors |
|
12 / 54 page ![]() PCA8576F All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved. Product data sheet Rev. 3 — 3 December 2014 12 of 54 NXP Semiconductors PCA8576F Automotive 40 × 4 LCD driver 7.3.3 RAM filling in 1:3 multiplex drive mode In 1:3 multiplex drive mode, the RAM is written as shown in Table 13 (see Figure 5 as well). If the bit at position BP2/S2 would be written by a second byte transmitted, then the mapping of the segment bits would change as illustrated in Table 14. In the case described in Table 14 the RAM has to be written entirely and BP2/S2, BP2/S5, BP2/S8 etc. have to be connected to segments/elements on the display. This can be achieved by a combination of writing and rewriting the RAM like follows: • In the first write to the RAM, bits a7 to a0 are written. • In the second write, bits b7 to b0 are written, overwriting bits a1 and a0 with bits b7 and b6. • In the third write, bits c7 to c0 are written, overwriting bits b1 and b0 with bits c7 and c6. Depending on the method of writing to the RAM (standard or entire filling by rewriting), some segments/elements remain unused or can be used, but it has to be considered in the module layout process as well as in the driver software design. Table 13. Standard RAM filling in 1:3 multiplex drive mode Assumption: BP2/S2, BP2/S5, BP2/S8 etc. are not connected to any segments/elements on the display. Display RAM bits (rows)/ backplane outputs (BPn) Display RAM addresses (columns)/segment outputs (Sn) 0 1 2 3 4 5 6 7 8 9 : 0 a7 a4 a1 b7 b4 b1 c7 c4 c1 d7 : 1 a6 a3 a0 b6 b3 b0 c6 c3 c0 d6 : 2 a5 a2 - b5 b2 - c5 c2 - d5 : 3 --- --- --- -: Table 14. Entire RAM filling by rewriting in 1:3 multiplex drive mode Assumption: BP2/S2, BP2/S5, BP2/S8 etc. are connected to segments/elements on the display. Display RAM bits (rows)/ backplane outputs (BPn) Display RAM addresses (columns)/segment outputs (Sn) 0 1 2 3 4 5 6 7 8 9 : 0 a7 a4 a1/b7 b4 b1/c7 c4 c1/d7 d4 d1/e7 e4 : 1 a6 a3 a0/b6 b3 b0/c6 c3 c0/d6 d3 d0/e6 e3 : 2 a5 a2 b5 b2 c5 c2 d5 d2 e5 e2 : 3 --- --- --- -: |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |