VL53L1 datasheet(6/39 Pages) STMICROELECTRONICS

部件名	VL53L1

功能描述	New generation Time-of-Flight ranging sensor with advanced multi-zone and multi-object detection

PDF	39 Pages

Scroll/Zoom	100%

制造商	STMICROELECTRONICS [STMicroelectronics]

网页	http://www.st.com

标志

6 / 39 page

Product overview

VL53L1

6/39

DocID029631 Rev 12

1.4

Application schematic

Figure 3 shows the application schematic of the VL53L1.

Figure 3. VL53L1 schematic

Note:

Capacitors on external supply AVDD should be placed as close as possible to the

AVDDVCSEL and AVSSVCSEL module pins.

Note:

External pull-up resistor values can be found in I2C-bus specification. Pull-ups are typically

fitted only once per bus, near the host. For suggested values see Table 3 and Table 4.

Note:

XSHUT pin must always be driven to avoid leakage current. A pull-up is needed if the host

state is not known.

XSHUT is needed to use HW standby mode (no I2C communication).

Note:

XSHUT and GPIO1 pull up recommended values are 10 kOhms

Note:

GPIO1 to be left unconnected if not used

Rserial

For hardware interrupt

VL53L1 数据表(PDF) 6 Page - STMicroelectronics