FT902Q-R datasheet(22/67 Pages) BRIDGETEK

22 / 67 page

FT900

/1/2/3 Revision C Embedded Microcontroller Datasheet

Version 1.0

Document No.: BRT_000172 Clearance No.: BRT#087

No.

Name

Type

Description

Camera data 4 input.

10-bit D/A converter 1, output.

DAC0/CAM_D3/GPIO14

I/O

GPIO14 input/output. (By default is GPIO input, internal pull-low)

Camera data 3 input.

10-bit D/A converter 0, output.

CAN0_TXD/CAM_D2/GPIO15

I/O

GPIO15 input/output. (By default is GPIO input, internal pull-low)

CAN0 transmitter output. [1]

Camera data 2 input.

100

CAN0_RXD/CAM_D1/GPIO16

I/O

GPIO16 input/output. (By default is GPIO input, internal pull-low)

CAN0 receiver input. [1]

Camera data 1 input.

Table 3-1 - FT900 pin description

[1]

CAN Bus 0/1 only are featured on both FT900 and FT902 packages.

[2]

Ethernet pins are available on FT900 and FT901 only. For FT902 and FT903, shall leave all

Ethernet pins as NC pin floating except for pin61 and pin62 as GPIO by default.

Notes:

: Power or ground

: Input

: Output

: Open drain output

I/O

: Bi-direction Input and Output

: Analog Input

: Analog Output

AI/O

: Analog Input / Output

FT902Q-R 数据表(PDF) 22 Page - Bridgetek Pte Ltd.

FT902Q-R 数据表(HTML) 22 Page - Bridgetek Pte Ltd.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67

数据表下载