DSPIC30F datasheet(164/220 Pages) MICROCHIP

164 / 220 page

dsPIC30F5011/5013

DS70116C-page 162

Preliminary

 2004 Microchip Technology Inc.

22.14 PICDEM 1 PICmicro

Demonstration Board

The PICDEM 1 demonstration board demonstrates the

capabilities

the

PIC16C5X

(PIC16C54

PIC16C58A),

PIC16C61,

PIC16C62X,

PIC16C71,

PIC16C8X, PIC17C42, PIC17C43 and PIC17C44. All

necessary hardware and software is included to run

basic demo programs. The sample microcontrollers

provided with the PICDEM 1 demonstration board can

be programmed with a PRO MATE II device program-

mer or a PICSTART Plus development programmer.

The PICDEM 1 demonstration board can be connected

to the MPLAB ICE in-circuit emulator for testing. A

prototype area extends the circuitry for additional appli-

cation components. Features include an RS-232

interface, a potentiometer for simulated analog input,

push button switches and eight LEDs.

22.15 PICDEM.net Internet/Ethernet

Demonstration Board

The PICDEM.net demonstration board is an Internet/

Ethernet demonstration board using the PIC18F452

microcontroller and TCP/IP firmware. The board

supports any 40-pin DIP device that conforms to the

standard

pinout

used

the

PIC16F877

PIC18C452. This kit features a user friendly TCP/IP

stack, web server with HTML, a 24L256 Serial

EEPROM for Xmodem download to web pages into

Serial EEPROM, ICSP/MPLAB ICD 2 interface con-

nector, an Ethernet interface, RS-232 interface and a

16 x 2 LCD display. Also included is the book and

CD-ROM

“TCP/IP Lean, Web Servers for Embedded

Systems,” by Jeremy Bentham

22.16 PICDEM 2 Plus

Demonstration Board

The PICDEM 2 Plus demonstration board supports

many 18, 28 and 40-pin microcontrollers, including

PIC16F87X and PIC18FXX2 devices. All the neces-

sary hardware and software is included to run the dem-

onstration programs. The sample microcontrollers

provided with the PICDEM 2 demonstration board can

be programmed with a PRO MATE II device program-

mer, PICSTART Plus development programmer, or

MPLAB ICD 2 with a Universal Programmer Adapter.

The MPLAB ICD 2 and MPLAB ICE in-circuit emulators

may also be used with the PICDEM 2 demonstration

board to test firmware. A prototype area extends the

circuitry for additional application components. Some

of the features include an RS-232 interface, a 2 x 16

LCD display, a piezo speaker, an on-board temperature

sensor, four LEDs and sample PIC18F452 and

PIC16F877 Flash microcontrollers.

22.17 PICDEM 3 PIC16C92X

Demonstration Board

The PICDEM 3 demonstration board supports the

PIC16C923 and PIC16C924 in the PLCC package. All

the necessary hardware and software is included to run

the demonstration programs.

22.18 PICDEM 4 8/14/18-Pin

Demonstration Board

The PICDEM 4 can be used to demonstrate the capa-

bilities of the 8, 14 and 18-pin PIC16XXXX and

PIC18XXXX MCUs, including the PIC16F818/819,

PIC16F87/88, PIC16F62XA and the PIC18F1320

family of microcontrollers. PICDEM 4 is intended to

showcase the many features of these low pin count

parts, including LIN and Motor Control using ECCP.

Special provisions are made for low-power operation

with the supercapacitor circuit and jumpers allow on-

board hardware to be disabled to eliminate current

draw in this mode. Included on the demo board are pro-

visions for Crystal, RC or Canned Oscillator modes, a

five volt regulator for use with a nine volt wall adapter

or battery, DB-9 RS-232 interface, ICD connector for

programming via ICSP and development with MPLAB

ICD 2, 2 x 16 liquid crystal display, PCB footprints for

H-Bridge motor driver, LIN transceiver and EEPROM.

Also included are: header for expansion, eight LEDs,

four potentiometers, three push buttons and a proto-

typing area. Included with the kit is a PIC16F627A and

a PIC18F1320. Tutorial firmware is included along with

the User’s Guide.

22.19 PICDEM 17 Demonstration Board

The PICDEM 17 demonstration board is an evaluation

board that demonstrates the capabilities of several

Microchip

microcontrollers,

including

PIC17C752,

PIC17C756A, PIC17C762 and PIC17C766. A pro-

grammed sample is included. The PRO MATE II device

programmer, or the PICSTART Plus development pro-

grammer, can be used to reprogram the device for user

tailored application development. The PICDEM 17

demonstration board supports program download and

execution from external on-board Flash memory. A

generous prototype area is available for user hardware

expansion.

DSPIC30F 数据表(PDF) 164 Page - Microchip Technology

DSPIC30F 数据表(HTML) 164 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

DSPIC30F 数据表(PDF) 164 Page - Microchip Technology

DSPIC30F 数据表(HTML) 164 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载