The information contained herein is exclusive property of ATTEND. Do not copy and print except that Attend

accepts. 本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。

-1 -

SPECIFICATION AND PERFORMANCE

Series

104H-TDA0-R01

File

104H-TDA0-R01_SPCE_2

Date

2017/10/26

Scope:

This specification covers the requirements for product performance, test methods and

quality assurance provisions of 104H-TDA0-R01

Performance and Descriptions:

The product is designed to meet the electrical, mechanical and environmental performance

requirements specification. Unless otherwise specified, all tests are performed at ambient

environmental conditions.

RoHS:

All material in according with the RoHS environment related substances list controlled.

MATERIAL AND FINISH

INSULATOR

Material

Plastic Body : Liquid Crystal Polymer

Slider : Liquid Crystal Polymer

CONTACT

Material

Contact : Phosphor Bronze Alloy

Switch : Phosphor Bronze Alloy

Plating

Contact Area : 10u” Gold Plating

Solder Area : Gold Flash

SHELL OR COVER

Material

Shell : Stainless

Latch : Stainless

Drag Link : Stainless

Spring : Piano Wire

Plating

RATING

Rating Current: 0.5A (Max.)/(1PIN)

Rating Voltage: 100V AC/DC

Operating Temperature: -40℃ to +90℃

Storage Temperature: -40℃ to +90℃

ELECTRICAL

Item

Requirement

Test Condition

Contact Resistance

Initial: 80 mΩ Max

Solder connectors on PCB and mate them

together, measure by applying closed circuit

current of 10mA maximum at open circuit voltage

of 20mV (max).(JIS C5402 5.4)

Insulation Resistance

Initial:

1000MΩ Min

Apply 500V DC between adjacent contacts, or

contact and ground.

(MIL-STD-202 METHOD 302)