SPECIFICATION AND PERFORMANCE

SERIES:

112J-TXAR-R01

FILE:

112J-TXAR-R01_spec

DATE:

2013/10/31

The information contained herein is exclusive property of. Do not copy and print except that Attend accepts.

本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。

-2 -

ELECTRICAL

Item

Requirement

Test Condition

Contact Resistance

Initial:

50 mΩ (Max)

Solder connectors on PCB and mate them

together, measure by applying closed circuit

current of 10mA maximum at open circuit

voltage of 20mV (max).

(JIS C5402 5.4)

Insulation Resistance Initial:

1000 MΩ(Min).

Apply 500V DC between adjacent contacts,

or contact and ground.

(MIL-STD-202 METHOD 302)

Dielectric

Withstanding Voltage

No breakdown

Mate connectors; apply 500V AC (rms.)

between two adjacent for 1minute.

(Trip current:1mA)

(MIL-STD-202 METHOD 301)

MECHANICAL

Item

Requirement

Test Condition

Contact Retention

Force

2.5N per pin (Min.) Place a connector on the push-pull machine,

then apply a force on a contact head and push

the contact to the opposite direction of the

contact insertion at the speed of

25 ± 3mm/min.

(EIA364-29)

Durability

Finish

1.Contact

Resistance:

80mΩ (Max)

2.No Damage

Solder connectors on PCB, then place them

on the pull-push machine, and repeat mating

and un-mating 10,000cycles repeatedly at a

rate of 400~600 cycles/hour.

(EIA364-09)