SPECIFICATION AND PERFORMANCE

SERIES:

112J-TXAR-R01

FILE:

112J-TXAR-R01_spec

DATE:

2013/10/31

The information contained herein is exclusive property of. Do not copy and print except that Attend accepts.

本文件係屬立威科技股份有限公司所有；非經同意，不得以任何覆寫、拷貝、翻印等方式私自據有。亦不得擅加毀損、塗改。

-3 -

Vibration

Finish

1. No electrical

discontinuity more

than 0.1μs.

2 .No Damage

3. Contact

Resistance:

80mΩ (Max)

Mate dummy card and subject to the

following vibration conditions, for a period of

30 minutes in each of 3 mutually

perpendicular axis, passing DC 1 mA during

the test. Amplitude: 1.52 mm P-P or 19.6

m/s2 Frequency: 10-55-10Hz Shall be

traversed in 1minute.

(MIL-STD-202 METHOD 201)

Shock

Finish

1. No electrical

discontinuity more

than 0.1μs.

2 .No Damage

3. Contact

Resistance:

80mΩ (Max)

Solder connectors on PCB and mate them

together, subject to he following shock

conditions, 3 shocks shall be period along 3

mutually perpendicular axis, passing DC 1mA

current during the test.

1 axis, plus-minus direction, core

3times.(total:18times) 490m/s2

(MIL-STD-202 METHOD 213)

Card Insertion / Eject

Force

9.8N(Max)

Push the card at the speed rate 25 ± 3

mm/minute.

Card Release Force

2N+/-1N

From the state of the card lock, Pull the card

at the speed rate 25 ± 3 mm/minute.

Push in strength

No Damage

The card inserted in positive and the opposite

direction and the load of 19.6N is added

ENVIRONMENTAL

Item

Requirement

Test Condition

Humidity

Finish

1. Contact

Resistance:

80mΩ (Max)

2. Insulation

Resistance:

100MΩ (Min)

Humidity storage at +40ºC with 90~95% RH

for 96 hours. Upon completion of the

exposure period,

the test specimens shall be conditions for 1 of

2 hrs, then 10 mating cycles while.

(EIA364-31)