Si8285/86 Data Sheet

SiC FET-Ready ISODrivers with System Safety Features

The Si828x (Si8285 and Si8286) are isolated, high current gate drivers with integrated system

safety and feedback functions. The devices are ideal for driving Silicon Carbide (SiC) FETs,

power MOSFETs, and IGBTs used in a wide variety of inverter and motor control applications.

The Si8285 and Si8286 isolated gate drivers utilize Skyworks' proprietary silicon isolation

technology, supporting up to 5.0 kVrms withstand voltage per UL1577. This technology en-

ables higher performance, reduced variation with temperature and age, tighter part-to-part

matching, and superior common-mode rejection compared to other isolated gate driver tech-

nologies.

The input to the device is a complementary digital input that can be utilized in several configu-

rations. The input side of the isolation also has several control and feedback digital signals.

The controller to the device receives information about the driver side power state (Si8285)

and fault state of the device and recovers the device from fault through an active-low reset pin.

On the output side, the Si8285 provides separate pull-up and pull-down pins for the gate.

The Si8286 has a single pin for both functions. A dedicated DSAT pin detects a desaturation

condition and immediately shuts down the driver in a controlled manner using soft shutdown.

The Si8285 device also integrates a Miller clamp to assure a strong turn-off of the power

switch.

Automotive Grade is available. These products are built using automotive-specific flows at all

steps in the manufacturing process to ensure the robustness and low defectivity required for

automotive applications.

Industrial Applications

• SiC/IGBT/ MOSFET gate drives

• Industrial and renewable energy inverters

• AC, Brushless, and DC motor controls

• Variable-speed motor controllers

• Isolated switch mode power supplies

Automotive Applications

• Hybrid electric and electric vehicles

• Traction inverters

• On-board chargers

• Inductive chargers

• DC-DC converters

Safety Regulatory Approvals

• UL 1577 recognized: 5000 VRMS for 1 minute

• CSA approval: IEC 62368-1 (reinforced insulation)

• VDE certification: IEC 60747-17 (basic, pending), 62368-1 (reinforced insulation)

• CQC certification approval: GB4943.1-2011 (reinforced insulation)

KEY FEATURES

• System Safety Features

• DESAT detection

• FAULT feedback

• Undervoltage Lock Out (UVLO)

including 13 and 15 V for SiC

FET

• Soft shutdown on fault condition

• Ultra-fast short circuit protection

<< 1 µs

• Robust reference design

for current boost, DESAT

adjustment, soft shutdown tuning,

and external Miller clamp

transistor

• High-performance isolation

technology

• High CMTI 125 kV/µs

• 30 V driver-side supply voltage

• Integrated Miller clamp (Si8285

only)

• Power ready pin (Si8285 only)

• Complementary driver control input

• Si8286 pin-out compatible with

HCPL-316J

• Compact package: 16-pin wide-

body SOIC

• Automotive-grade OPNs available

• PPAP documentation support

• IMDS and CAMDS listing support

• AEC-Q100 Qualified

• Temp range: –40 to 125 °C

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

1

Rev. 2.0 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • October 12, 2021

1