| 数据搜索系统,热门电子元器件搜索 |
|
SIM800 数据表(PDF) 53 Page - SIMCom |
|
|
|||||||||||||||||||||||||||||
SIM800 数据表(HTML) 53 Page - SIMCom |
|
53 / 380 page ![]() Smart Machine Smart Decision SIM800 Series_AT Command Manual_V1.09 53 2015-08-03 3 space (0) Parameter Saving Mode AT&W_SAVE Max Response Time - Reference V.25ter Note The Command is applied for Command state; In <format> parameter, "0 parity" means no parity; The <parity> field is ignored if the <format> field specifies no parity and string "+ICF: <format>,255" will be response to AT+ICF? Command. 2.2.40 AT+IFC Set TE-TA Local Data Flow Control AT+IFC Set TE-TA Local Data Flow Control Response +IFC: (list of supported <dce_by_dte>s),(list of supported <dte_by_dce>s) OK Test Command AT+IFC=? Parameters See Write Command Response +IFC: <dce_by_dte>,<dte_by_dce> OK Read Command AT+IFC? Parameters See Write Command Response This parameter setting determines the data flow control on the serial interface for data mode. OK Write Command AT+IFC=<dce_b y_dte>[,<dte_by _dce>] Parameters <dce_by_dte> Specifies the method will be used by TE at receive of data from TA 0 No flow control 1 Software flow control 2 Hardware flow control <dte_by_dce>Specifies the method will be used by TA at receive of data from TE 0 No flow control 1 Software flow control 2 Hardware flow control |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |