SIM800 datasheet(76/380 Pages) SIMCOM

76 / 380 page

Smart Machine Smart Decision

SIM800 Series_AT Command Manual_V1.09

2015-08-03

1 Enable +CLIP notification.

<m>

0 CLIP not provisioned

1 CLIP provisioned

2 Unknown (e.g. no network, etc.)

Unsolicited Result Code

When the presentation of the CLI at the TE is enabled (and calling

subscriber allows), an unsolicited result code is returned after every RING

(or +CRING: <type>) at a mobile terminating call.

+CLIP: <number>,<type>[,<subaddr>,<satype>,<alphaId>,<CLI

validity>]

Parameters

String type (string should be included in quotation marks)

phone number of calling address in format specified by

<type>.

<type>

Type of address octet in integer format;

129 Unknown type

161 National number type

145 International number type

177 Network specific number

String type (subaddress of format specified by <satype>)

Integer type (type of subaddress)

String type (string should be included in quotation marks)

alphanumeric representation of <number> corresponding to the entry

found in phone book.

0 CLI valid

1 CLI has been withheld by the originator.

2 CLI is not available due to interworking problems or

limitations of originating network.

Parameter Saving

Mode

NO_SAVE

Max Response

Time

15s

Reference

Note

3.2.19 AT+CLIR

Calling Line Identification Restriction

AT+CLIR

Calling Line Identification Restriction

Response

+CLIR: (list of supported <n>s)

Test Command

AT+CLIR=?

Parameters

SIM800 数据表(PDF) 76 Page - SIMCom

SIM800 数据表(HTML) 76 Page - SIMCom

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载