SIM800 datasheet(77/380 Pages) SIMCOM

77 / 380 page

Smart Machine Smart Decision

SIM800 Series_AT Command Manual_V1.09

2015-08-03

See Write Command

Response

+CLIR: <n>, <m>

If error is related to ME functionality:

+CME ERROR: <err>

Read Command

AT+CLIR?

Parameters

See Write Command

Response

TA restricts or enables the presentation of the CLI to the called party when

originating a call.

The Command overrides the CLIR subscription (default is restricted or

allowed) when temporary mode is provisioned as a default adjustment for

all following outgoing calls. This adjustment can be revoked by using the

opposite Command.

If error is related to ME functionality:

+CME ERROR: <err>

Write Command

AT+CLIR=<n>

Parameters

<n>

(parameter sets the adjustment for outgoing calls):

0 Presentation indicator is used according to the subscription of

the CLIR service.

1 CLIR invocation

2 CLIR suppression

<m>

(parameter shows the subscriber CLIR service status in the

network):

0 CLIR not provisioned

1 CLIR provisioned in permanent mode

2 Unknown (e.g. no network, etc.)

3 CLIR temporary mode presentation restricted

4 CLIR temporary mode presentation allowed

Parameter Saving

Mode

NO_SAVE

Max Response

Time

15s

Reference

Note

3.2.20 AT+CMEE

Report Mobile Equipment Error

AT+CMEE

Report Mobile Equipment Error

SIM800 数据表(PDF) 77 Page - SIMCom

SIM800 数据表(HTML) 77 Page - SIMCom

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载