SIM800 datasheet(118/380 Pages) SIMCOM

118 / 380 page

Smart Machine Smart Decision

SIM800 Series_AT Command Manual_V1.09

118

2015-08-03

+CMGR: <stat>,<fo>,<mr>[,<ra>][,<tora>],<scts>,<dt>,<st>

for SMS-COMMANDs:

+CMGR: <stat>,<fo>,<ct>[,<pid>[,<mn>][,<da>][,<toda>]

,<length><CR><LF><cdata>]

for CBM storage:

+CMGR: <stat>,<sn>,<mid>,<dcs>,<page>,<pages><CR><LF><data>

2) If PDU mode (+CMGF=0) and Command successful:

+CMGR: <stat>[,<alpha>],<length><CR><LF><pdu>

3) If error is related to ME functionality:

+CMS ERROR: <err>

Parameters

<alpha>

String type (string should be included in quotation marks)

alphanumeric representation of <da> or <oa> corresponding to the entry

found in MT phonebook; implementation of this feature is manufacturer

specific

<da>

GSM 03.40 TP-Destination-Address Address-Value field in

string format; BCD numbers (or GSM default alphabet characters) are

converted to characters of the currently selected TE character set (specified

by +CSCS in 3GPP TS 27.007); type of address given by <toda>

<data>

In the case of SMS: GSM 03.40 TP-User-Data in text mode

responses; format:

- if <dcs> indicates that GSM 03.38 default alphabet is used and

<fo> indicates that GSM 03.40 TPUser-Data-Header-Indication

is not set:

- if TE character set other than "HEX" (refer Command Select

TE Character Set +CSCS in 3GPP TS 27.007):ME/TA converts

GSM alphabet into current TE character set according to rules

of Annex A

- if TE character set is "HEX": ME/TA converts each 7-bit

character of GSM alphabet into two IRA character long

hexadecimal number (e.g. character P (GSM 23) is presented as

17 (IRA 49 and 55))

- if <dcs> indicates that 8-bit or UCS2 data coding scheme is

used, or <fo> indicates that GSM 03.40

TP-User-Data-Header-Indication is set: ME/TA converts each

8-bit octet into two IRA character long hexadecimal number

(e.g. octet with integer value 42 is presented to TE as two

characters 2A (IRA 50 and 65)) In the case of CBS: GSM 03.41

CBM Content of Message in text mode responses; format:

- if <dcs> indicates that GSM 03.38 default alphabet is used:

- if TE character set other than "HEX" (refer Command +CSCS

in 3GPP TS 27.007): ME/TA converts GSM alphabet into

SIM800 数据表(PDF) 118 Page - SIMCom

SIM800 数据表(HTML) 118 Page - SIMCom

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载