| 数据搜索系统,热门电子元器件搜索 |
|
SIM800 数据表(PDF) 200 Page - SIMCom |
|
|
|||||||||||||||||||||||||||||
SIM800 数据表(HTML) 200 Page - SIMCom |
|
200 / 380 page ![]() Smart Machine Smart Decision SIM800 Series_AT Command Manual_V1.09 200 2015-08-03 OK If error is related to ME functionality: +CME ERROR: <err> AT+CEGPRS=< switch>[,<class>] Parameters <switch> 0 Switch off EDGE 1 Switch on EDGE <class> EGPRS multi-slot class Note: If <switch> value is equal to 1, <class> must be input.otherwise <class> is optional. Parameter Saving Mode AUTO_SAVE Max Response Time - Reference Note The module must restart if the EDGE is switched on or off. 6.2.70 AT+CGPIO Control the GPIO by PIN Index AT+CGPIO Control the GPIO by PIN Index Response +CGPIO: (0-1),( list of supported <pin>s),(0-1),(0-1) OK Test Command AT+CGPIO=? Parameters See Write Command Response OK ERROR Write Command AT+CGPIO=<ope ration>,<pin>,<fu nction>,<level> Parameters <Operation> 0 Set the GPIO function including the GPIO output . 1 Read the GPIO level. Please note that only when the gpio is set as input, user can use parameter 1 to read the GPIO level, otherwise the module will return "ERROR". <pin> The PIN index you want to be set. (It has relations with the hardware, please refer to the hardware manual) <function> Only when <Operation> is set to 0, this option takes effect. 0 Set the GPIO to input. 1 Set the GPIO to output <level> 0 Set the GPIO low level 1 Set the GPIO high level |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |