AT89C5131A-RDTIM datasheet(45/186 Pages) ATMEL

45 / 186 page

AT89C5130A/31A-M

4337G–USB–11/06

Boot Process

Software Boot Process

Example

Many algorithms can be used for the software boot process. Below are descriptions of

the different flags and Bytes.

Boot Loader Jump bit (BLJB):

- This bit indicates if on RESET the user wants to jump to this application at address

@0000h on FM0 or execute the boot loader at address @F400h on FM1.

- BLJB = 0 (i.e. bootloader FM1 executed after a reset) is the default Atmel factory pro-

gramming.

-To read or modify this bit, the APIs are used.

Boot Vector Address (SBV):

- This byte contains the MSB of the user boot loader address in FM0.

- The default value of SBV is FFh (no user boot loader in FM0).

- To read or modify this byte, the APIs are used.

Extra Byte (EB) & Boot Status Byte (BSB):

- These Bytes are reserved for customer use.

- To read or modify these Bytes, the APIs are used.

Figure 23.

Hardware Boot Process Algorithm

RESET

BLJB == 0

Bootloader

in FM1

Application

in FM0

bit ENBOOT in AUXR1 Register

Is Initialized with BLJB Inverted.

ENBOOT = 0

PC = 0000h

ENBOOT = 1

PC = F400h

Example, if BLJB=0, ENBOOT

is set (=1) during reset, thus the

bootloader is executed after the

reset.

AT89C5131A-RDTIM 数据表(PDF) 45 Page - ATMEL Corporation

AT89C5131A-RDTIM 数据表(HTML) 45 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载