M28W320FCT datasheet(63/69 Pages) STMICROELECTRONICS

63 / 69 page

M28W320FCT, M28W320FCB

Flowcharts and pseudo codes

63/69

Figure 23.

Protection Register Program Flowchart and Pseudo Code

Status check of b1 (Protected Block), b3 (VPP Invalid) and b4 (Program Error) can be made after each program operation

or after a sequence.

If an error is found, the Status Register must be cleared before further Program/Erase Controller operations.

Write C0h

AI04381

Start

Write Address

& Data

Read Status

YES

b7 = 1

YES

b3 = 0

b4 = 0

VPP Invalid

Error (1, 2)

Program

Error (1, 2)

protection_register_program_command (addressToProgram, dataToProgram) {:

writeToFlash (any_address, 0xC0) ;

do {

status_register=readFlash (any_address) ;

/* E or G must be toggled*/

} while (status_register.b7== 0) ;

if (status_register.b3==1) /*VPP invalid error */

error_handler ( ) ;

YES

End

YES

b1 = 0

Program to Protected

Block Error (1, 2)

writeToFlash (addressToProgram, dataToProgram) ;

/*Memory enters read status state after

the Program Command*/

if (status_register.b4==1) /*program error */

error_handler ( ) ;

if (status_register.b1==1) /*program to protect block error */

error_handler ( ) ;

}

M28W320FCT 数据表(PDF) 63 Page - STMicroelectronics

M28W320FCT 数据表(HTML) 63 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69

数据表下载

链接网址

M28W320FCT 数据表(PDF) 63 Page - STMicroelectronics

M28W320FCT 数据表(HTML) 63 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69

数据表 下载

链接网址

数据表下载