SN65MLVD080 datasheet(5/28 Pages) TI

5 / 28 page

www.ti.com

DRIVER SWITCHING CHARACTERISTICS

SN65MLVD080

SN65MLVD082

SLLS581B – SEPTEMBER 2003 – REVISED SEPTEMBER 2005

over recommended operating conditions unless otherwise noted

PARAMETER

TEST CONDITIONS

MIN TYP(1)

MAX

UNIT

tpLH

Propagation delay time, low-to-high-level output

1.5

2.4

tpHL

Propagation delay time, high-to-low-level output

1.5

2.4

Differential output signal rise time

Differential output signal fall time

See Figure 5

tsk(o)

Output skew

350

tsk(p)

Pulse skew (|tPHL– tPLH|)

150

tsk(pp)

Part-to-part skew (2)

600

tjit(per)

Period jitter, rms (1 standard deviation)(3)

100 MHz clock input(4)

tjit(c-c)

Cycle-to-cycle jitter, rms

tjit(det)

Deterministic jitter

150

200 Mbps 215–1 PRBS input(5)

tjit(pp)

Peak-to-peak jitter(2)(6)

190

tPZH

Enable time, high-impedance-to-high-level output

tPZL

Enable time, high-impedance-to-low-level output

See Figure 6

tPHZ

Disable time, high-level-to-high-impedance output

tPLZ

Disable time, low-level-to-high-impedance output

(1)

All typical values are at 25°C and with a 3.3-V supply voltage.

(2)

tsk(pp) is the magnitude of the time difference in propagation delay times between any specified terminals of two devices when both

devices operate with the same supply voltages, at the same temperature, and have identical packages and test circuits.

(3)

Jitter is ensured by design and characterization. Stimulus jitter has been subtracted from the numbers.

(4)

tr = tf = 0.5 ns (10% to 90%), measured over 30 k samples.

(5)

tr = tf = 0.5 ns (10% to 90%), measured over 100 k samples.

(6)

Peak-to-peak jitter includes jitter due to pulse skew (tsk(p)).

Submit Documentation Feedback

SN65MLVD080 数据表(PDF) 5 Page - Texas Instruments

SN65MLVD080 数据表(HTML) 5 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

数据表下载