| 数据搜索系统,热门电子元器件搜索 |
|
HYS64T64020HDL 数据表(PDF) 16 Page - Qimonda AG |
|
|
|||||||||||||||||||||||||||||
HYS64T64020HDL 数据表(HTML) 16 Page - Qimonda AG |
|
16 / 69 page ![]() HYS64T[32/64/128]xxxHDL-[25F/2.5/3/3S/3.7/5]-B SO-DIMM DDR2 SDRAM Module Internet Data Sheet Rev. 1.12, 2007-10 16 03292006-5LTN-QML0 2) The CK/CK input reference level (for timing reference to CK/CK) is the point at which CK and CK cross. The DQS / DQS, RDQS / RDQS, input reference level is the crosspoint when in differential strobe mode 3) Inputs are not recognized as valid until V REF stabilizes. During the period before VREF stabilizes, CKE = 0.2 x VDDQ 4) The output timing reference voltage level is V TT. 5) t RAS.MAX is calculated from the maximum amount of time a DDR2 device can operate without a refresh command which is equal to 9 x tREFI. 3.3.2 Component AC Timing Parameters TABLE 14 DRAM Component Timing Parameter by Speed Grade - DDR2–800 and DDR2–667 Parameter Symbol DDR2–800 DDR2–667 Unit Note2)3)5 )6)7)8) Min. Max. Min. Max. CAS to CAS command delay t CCD 2— 2 — nCK Average clock high pulse width t CH.AVG 0.48 0.52 0.48 0.52 t CK.AVG 10)11) Average clock period t CK.AVG 2500 8000 3000 8000 ps CKE minimum pulse width ( high and low pulse width) t CKE 3— 3 — nCK 12) Average clock low pulse width t CL.AVG 0.48 0.52 0.48 0.52 t CK.AVG 10)11) Auto-Precharge write recovery + precharge time t DAL WR + t nRP —WR + t nRP —nCK 13)14) Minimum time clocks remain ON after CKE asynchronously drops LOW t DELAY t IS + tCK .AVG + t IH –– t IS + t CK .AVG + tIH –– ns DQ and DM input hold time t DH.BASE 125 –– 175 –– ps 15)19)20) DQ and DM input pulse width for each input t DIPW 0.35 — 0.35 — t CK.AVG DQS input high pulse width t DQSH 0.35 — 0.35 — t CK.AVG DQS input low pulse width t DQSL 0.35 — 0.35 — t CK.AVG DQS-DQ skew for DQS & associated DQ signals t DQSQ — 200 — 240 ps 16) DQS latching rising transition to associated clock edges t DQSS – 0.25 + 0.25 – 0.25 + 0.25 t CK.AVG 17) DQ and DM input setup time t DS.BASE 50 –– 100 –– ps 18)19)20) DQS falling edge hold time from CK t DSH 0.2 — 0.2 — t CK.AVG 17) DQS falling edge to CK setup time t DSS 0.2 — 0.2 — t CK.AVG 17) CK half pulse width t HP Min( t CH.ABS, t CL.ABS) __ Min( t CH.ABS, t CL.ABS) __ ps 21) Data-out high-impedance time from CK / CK t HZ — t AC.MAX — t AC.MAX ps 9)22) Address and control input hold time t IH.BASE 250 — 275 — ps 23)25) Control & address input pulse width for each input t IPW 0.6 — 0.6 — t CK.AVG Address and control input setup time t IS.BASE 175 — 200 — ps 24)25) DQ low impedance time from CK/CK t LZ.DQ 2x t AC.MIN tAC.MAX 2x t AC.MIN t AC.MAX ps 9)22) |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |