| 数据搜索系统,热门电子元器件搜索 |
|
HYS64T64020HDL 数据表(PDF) 24 Page - Qimonda AG |
|
|
|||||||||||||||||||||||||||||
HYS64T64020HDL 数据表(HTML) 24 Page - Qimonda AG |
|
24 / 69 page ![]() HYS64T[32/64/128]xxxHDL-[25F/2.5/3/3S/3.7/5]-B SO-DIMM DDR2 SDRAM Module Internet Data Sheet Rev. 1.12, 2007-10 24 03292006-5LTN-QML0 3.3.3 ODT AC Electrical Characteristics This chapter describes the ODT AC electrical characteristics. TABLE 16 ODT AC Characteristics and Operating Conditions for DDR2-667 & DDR2-800 TABLE 17 ODT AC Characteristics and Operating Conditions for DDR2-533 & DDR2-400 Symbol Parameter / Condition Values Unit Note Min. Max. t AOND ODT turn-on delay 2 2 n CK 1) 1) New units, “tCK.AVG” and “nCK”, are introduced in DDR2-667 and DDR2-800. Unit “tCK.AVG” represents the actual tCK.AVG of the input clock under operation. Unit “ n CK” represents one clock cycle of the input clock, counting the actual clock edges. Note that in DDR2-400 and DDR2-533, “ t CK” is used for both concepts. Example: tXP = 2 [nCK] means; if Power Down exit is registered at Tm, an Active command may be registered at T m + 2, even if (Tm + 2 - Tm) is 2 x tCK.AVG + tERR.2PER(Min). t AON ODT turn-on t AC.MIN t AC.MAX +0.7 ns ns 1)2) 2) ODT turn on time min is when the device leaves high impedance and ODT resistance begins to turn on. ODT turn on time max is when the ODT resistance is fully on. Both are measured from t AOND, which is interpreted differently per speed bin. For DDR2-667/800, tAOND is 2 clock cycles after the clock edge that registered a first ODT HIGH counting the actual input clock edges. t AONPD ODT turn-on (Power-Down Modes) t AC.MIN + 2 ns 2 t CK + tAC.MAX +1 ns ns 1) t AOFD ODT turn-off delay 2.5 2.5 n CK 1) t AOF ODT turn-off t AC.MIN t AC.MAX +0.6 ns ns 1)3) 3) ODT turn off time min is when the device starts to turn off ODT resistance. ODT turn off time max is when the bus is in high impedance. Both are measured from t AOFD, which is interpreted differently per speed bin. For DDR2-667/800, if tCK(avg) = 3 ns is assumed, tAOFD is 1.5 ns (= 0.5 x 3 ns) after the second trailing clock edge counting from the clock edge that registered a first ODT LOW and by counting the actual input clock edges. t AOFPD ODT turn-off (Power-Down Modes) t AC.MIN + 2 ns 2.5 t CK + tAC.MAX +1ns ns 1) t ANPD ODT to Power Down Mode Entry Latency 3 — n CK 1) t AXPD ODT Power Down Exit Latency 8 — n CK 1) Symbol Parameter / Condition Values Unit Note Min. Max. t AOND ODT turn-on delay 2 2 t CK t AON ODT turn-on t AC.MIN t AC.MAX + 1 ns ns 1) 1) ODT turn on time min. is when the device leaves high impedance and ODT resistance begins to turn on. ODT turn on time max is when the ODT resistance is fully on. Both are measured from t AOND, which is interpreted differently per speed bin. For DDR2-400/533, tAOND is 10 ns (= 2 x 5 ns) after the clock edge that registered a first ODT HIGH if t CK = 5 ns. t AONPD ODT turn-on (Power-Down Modes) t AC.MIN + 2 ns 2 t CK + tAC.MAX + 1 ns ns t AOFD ODT turn-off delay 2.5 2.5 t CK t AOF ODT turn-off t AC.MIN t AC.MAX + 0.6 ns ns 2) t AOFPD ODT turn-off (Power-Down Modes) t AC.MIN + 2 ns 2.5 t CK + tAC.MAX + 1 ns ns t ANPD ODT to Power Down Mode Entry Latency 3 — t CK t AXPD ODT Power Down Exit Latency 8 — t CK |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |