ADIN1111BCPZ-R7 datasheet(7/109 Pages) AD

7 / 109 page

Data Sheet

ADIN1111

ABSOLUTE MAXIMUM RATINGS

analog.com

Rev. A | 7 of 109

TA = 25°C, unless otherwise noted.

Table 4.

Parameter

Rating

VDDIO to GND

−0.3 V to +4 V

DLDO_1P1 to GND

−0.3 V to +1.35 V

AVDD_H, AVDD_L to GND

−0.3 V to +4 V

SPI1, INT to GND

−0.3 V to VDDIO + 0.3 V

TXN, TXP to GND

−0.3 V to AVDD + 0.3 V

LED_x, RESET, LINK_ST to GND

−0.3 V to VDDIO + 0.3 V

XTAL_I/CLK_IN to GND

−0.3 V to 2.75 V

XTAL_O, CLK25_REF to GND

−0.3 V to 1.35 V

Operating Temperature Range (TA)

Industrial

−40°C to +105°C

Storage Temperature Range

−65°C to +150°C

Junction Temperature (TJ maximum)

125°C

Power Dissipation

(TJ maximum − TA)/θJA

Lead Temperature

JEDEC industry standard

Soldering

J-STD-020

1 See the Pin Configuration and Function Descriptions section for a full list of SPI

pins.

Stresses at or above those listed under Absolute Maximum Ratings

may cause permanent damage to the product. This is a stress

rating only; functional operation of the product at these or any other

conditions above those indicated in the operational section of this

specification is not implied. Operation beyond the maximum operat-

ing conditions for extended periods may affect product reliability.

THERMAL RESISTANCE

θJA is the natural convection junction to ambient thermal resistance

measured in a one cubic foot sealed enclosure.

Table 5. Thermal Resistance

Package Type

θJA1

Unit

CP-32-202

°C/W

1 θJA is specified for the worst-case conditions, that is, a device soldered in a

circuit board for surface-mount packages.

2 Test Condition 1: thermal impedance simulated values are based on a JE-

DEC 2S2P thermal test board with thermal vias. See JEDEC JESD-51.

ELECTROSTATIC DISCHARGE (ESD) RATINGS

The following ESD information is provided for handling of ESD-sen-

sitive devices in an ESD protected area only.

Human body model (HBM) per ANSI/ESDA/JEDEC JS-001.

Field induced charged device model (FICDM) per ANSI/ESDA/JE-

DEC JS-002.

ESD Ratings for ADIN1111

Table 6. ADIN1111, 32-Lead LFCSP

ESD Model

Withstand Threshold (V)

Class

HBM

TXN, TXP Pins

8000

All Other Pins

2000

FICDM

1250

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Charged devi-

ces and circuit boards can discharge without detection. Although

this product features patented or proprietary protection circuitry,

damage may occur on devices subjected to high energy ESD.

Therefore, proper ESD precautions should be taken to avoid

performance degradation or loss of functionality.

ADIN1111BCPZ-R7 数据表(PDF) 7 Page - Analog Devices

ADIN1111BCPZ-R7 数据表(HTML) 7 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载