| 数据搜索系统,热门电子元器件搜索 |
|
TDA7546 数据表(PDF) 60 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
TDA7546 数据表(HTML) 60 Page - STMicroelectronics |
|
60 / 68 page ![]() Software specifications TDA7546 60/68 rds_bd_h and rds_bd_l without interruption. This must be done until the “bne” bit is set to zero (last RDS block). 2. If the SPI master is not able to handle the above protocol, it must read always at least the first five registers rds_int, rds_qu, rds_corrp, rds_bd_h, rds_bd_l out independent if “bne” is set or not. If the “bne” flag is set the whole RAM Buffer must be read out, by reading each time at least the five registers rds_int, rds_qu, rds_corrp, rds_bd_h and rds_bd_l without interruption. This must be done until the “bne” bit is set to zero (last RDS block). Note: In polling mode the interrupt flag “int” is just a indication that the wanted information is stored within the RAM buffer. Note: In polling mode it is possible that the last RDS data (rds_qu, rds_corrp, rds_bd_h and rds_bd_l), which was read out as the “bne” flag was set to zero, is identical to the RDS data before. This must be checked by the external micro controller by comparing the last received 2 RDS blocks. If they are identical, one of them can be skipped (This is the case if just one RDS block is stored within the RAM buffer). Hereafter you can find typical read/write access in SPI mode: Figure 19. Write rds_int, rds_bd_ctrl and pll_reg4 registers in SPI mode, reading RDS data and related flags Figure 20. Read out RDS data and related flags, no update of rds_int and rds_bd_ctrl registers Note: sinc4reg and testreg must be zero filled for application. CSN DATAIN DATAOUT CLK rds_int[0] rds_int[1] 2 64 63 8 7 6 5 4 3 1 rds_int[7] testreg[0] rds_int[6] rds_int[0] rds_int[1] rds_int[2] rds_int[3] rds_int[4] rds_int[5] testreg[1] shift of DATAIN in shiftregister update of shiftregister with registers content update of registers with shiftregister content if requested tcsu tsu th todv toh tcsh tcl tch td CSN DATAIN DATAOUT CLK rds_int[7:0] rds_qu[7:0] rds_corrp[7:0] rds_bd_h[7:0] rds_bd_l[7:0] {0,x,x,x,x,x,x,x} {x,x,x,x,x,x,x,x} {x,x,x,x,x,x,x,x} testreg[7:0] sinc4reg[7:0] |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |