Digital Fiber Sensor

FX-410 SERIES

178

Selection

Guide

Fibers

Fiber

Amplifiers

FX-500

FX-100

FX-300

FX-410

FX-311

FX-301-F7/

FX-301-F

FIBER

SENSORS

LASER

SENSORS

PHOTO-

ELECTRIC

SENSORS

MICRO

PHOTO-

ELECTRIC

SENSORS

AREA

SENSORS

LIGHT

CURTAINS /

SAFETY

COMPONENTS

PRESSURE /

FLOW

SENSORS

INDUCTIVE

PROXIMITY

SENSORS

PARTICULAR

USE

SENSORS

SENSOR

OPTIONS

SIMPLE

WIRE-SAVING

UNITS

WIRE-SAVING

SYSTEMS

MEASURE-

MENT

SENSORS

STATIC

ELECTRICITY

PREVENTION

DEVICES

LASER

MARKERS

PLC

HUMAN

MACHINE

INTERFACES

ENERGY

CONSUMPTION

VISUALIZATION

COMPONENTS

FA

COMPONENTS

MACHINE

VISION

SYSTEMS

UV

CURING

SYSTEMS

SPECIFICATIONS

Type

NPN output

PNP output

Red LED

Blue LED

Green LED

Red LED

Blue LED

Green LED

Model No.

FX-411

FX-411B

FX-411G

FX-411P

FX-411BP

FX-411GP

Item

FX-412 (Note 2) FX-412B (Note 2) FX-412G (Note 2)

Supply voltage

12 to 24 V DC ±10 % Ripple P-P 10 % or less

Power consumption

<Red LED type>

Normal operation: 960 mW or less (Current consumption 40 mA or less at 24 V supply voltage)

ECO mode: 840 mW or less (Current consumption 35 mA or less at 24 V supply voltage)

<Blue LED / Green LED type>

Normal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)

ECO mode: 580 mW or less (Current consumption 24 mA or less at 24 V supply voltage)

Output

<NPN output type>

NPN open-collector transistor

• Maximum sink current: 100 mA

50 mA, if five, or more, amplifiers

are connected in cascade

• Applied voltage: 30 V DC or less (between output and 0 V)

• Residual voltage: 1.5 V or less

at 100 mA sink current

50 mA, if five, or more, amplifiers

are connected in cascade

<PNP output type>

PNP open-collector transistor

• Maximum source current: 100 mA

50 mA, if five, or more, amplifiers

are connected in cascade

• Applied voltage: 30 V DC or less (between output and +V)

• Residual voltage: 1.5 V or less

at 100 mA sink current

50 mA, if five, or more, amplifiers

are connected in cascade

Utilization category

DC-12 or DC-13

Output operation

Switchable either Light-ON or Dark-ON

Short-circuit protection

Incorporated

Response time

150 µs or less (FAST), 500 µs or less (STD), 4.5 ms or less (U-LG) selectable with setting switch

Operation indicator

Orange LED (lights up when the output is ON)

Stability indicator

Green LED (lights up under stable light received condition or stable dark condition)

Timer function

Incorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective.

Timer period (Note 3): 1 ms to 3 sec. approx. (1 to 10 ms: Setting possible in units of 1 ms, 10 to 100 ms: Setting possible in units of 10 ms,

100 to 500 ms: Setting possible in units of 50 ms, 500 ms to 1 sec.: Setting possible in units of 100 ms, 1 to 3 sec.: Setting possible in units of 500 ms)

Automatic interference prevention function

Incorporated (Up to four sets of fiber heads can be mounted close together. However, U-LG mode is 8 fiber heads.)(Note 4)

Pollution degree

3 (Industrial environment)

Ambient temperature

–10 to +55 °C –14 to +131 °F

If 4 to 7 units are connected in cascade: –10 to +50 °C +14 to +122 °F,

if 8 to 16 units are connected in cascade: –10 to +45 °C +14 to +113 °F

(No dew condensation or icing allowed), Storage: –20 to +70 °C –4 to +158 °F

Ambient humidity

35 to 85 % RH, Storage: 35 to 85 % RH

Ambient illuminance

Incandescent light: 3,000 ℓx or less at the light-receiving face

EMC

EN 60947-5-2

Voltage withstandability

1,000 V AC for one min. between all supply terminals connected together and enclosure (Note 5)

Insulation resistance

20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure (Note 5)

Vibration resistance

10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each

Shock resistance

98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each

Emitting element (modulated)

Red LED

Blue LED

Green LED

Red LED

Blue LED

Green LED

Peak emission wavelength

650 nm 0.026 mil

470 nm 0.019 mil

525 nm 0.021 mil

650 nm 0.026 mil

470 nm 0.019 mil

525 nm 0.021 mil

Material

Enclosure: Heat-resistant ABS, Case cover: Polycarbonate

Cable length

Total length up to 100 m 328.084 ft (50 m 164.042 ft for 5 to 8 units, 20 m 65.617 ft for 9 to 16 units) is possible with 0.3 mm2, or more, cable.

Weight

Net weight: 20 g approx., Gross weight: 30 g approx.

Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.

2) The

FX-412□ has a threshold value adjuster that can be adjusted with your fingers.

3) For models manufactured up until June 2005, the timer period is approx. 1 to 500 ms.

4) When the power supply is switched on, the light emission timing is automatically set for interference prevention.

5) The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.