VCC

VEE

VCC

VCC

VEE

VEE

VCC

LSK489

R1

3.9 k

Ÿ

R2

3.9 k

Ÿ

V1

15 V

V2

15 V

VOUT

R3

1.13 k

Ÿ

R4

11.5

Ÿ

MMBT4401

MMBT4401

R5

300

Ÿ

Q3

Q4

+ +

Q1

Q2

R6

27.4 k

Ÿ

Product

Folder

Order

Now

Technical

Documents

Tools &

Software

Support &

Community

An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,

intellectual property matters and other important disclaimers. PRODUCTION DATA.

TLV172, TLV2172, TLV4172

SBOS784C – NOVEMBER 2016 – REVISED JANUARY 2019

TLVx172 36-V, single-supply, low-power

operational amplifier for cost-sensitive systems

1

1 Features

1

•

Supply Range: 4.5 V to 36 V, ±2.25 V to ±18 V

•

Low Noise: 9 nV/

√Hz

•

Low Offset Drift: ±1 μV/°C (Typical)

•

EMI-Hardened

•

Input Range Includes Negative Supply

•

Rail-to-Rail Output

•

Gain Bandwidth: 10 MHz

•

Slew Rate: 10 V/μs

•

Low Quiescent Current: 1.6 mA per Amplifier

•

High Common-Mode Rejection: 116 dB (Typical)

•

Low Input Bias Current: 10 pA

2 Applications

•

TFT-LCD Drive Circuits

•

Touch-Screen Displays

•

Wireless LANs

•

Portable Instrumentation

•

Analog-to-Digital Converter (ADC) Buffers

•

Active Filters

•

Line Drivers or Line Receivers

•

Ultrasound

•

Currency Counters

•

Transducer Amplifiers

3 Description

The TLVx172 family of electromagnetic interference

(EMI)-hardened,

36-V,

single-supply,

low-noise

operational amplifiers (op amps) features a THD+N of

0.0002% at 1 kHz with the ability to operate on

supplies ranging from 4.5 V (±2.25 V) to 36 V (±18V).

These features, along with low noise and very high

PSRR, enable the TLVx172 to amplify microvolt-level

signals

in

applications

such

as

HEV

and

EV

automobiles

and

power

trains,

medical

instrumentation, and more. The TLVx172 device

offers good offset and drift, a high bandwidth of 10

MHz, and a slew rate of 10 V/μs with only 2.3 mA of

quiescent current over temperature (maximum).

Unlike most op amps that are specified at only one

supply voltage, the TLVx172 device is specified from

4.5 V to 36 V. Input signals beyond the supply rails

do not cause phase reversal. TLVx172 device is

stable with capacitive loads up to 300 pF. The input

can operate 100 mV below the negative rail and

within 2 V of the positive rail for normal operation.

Note that the device can operate with a full rail-to-rail

input 100 mV beyond the positive rail, but with

reduced performance within 2 V of the positive rail.

The TLVx172 op amp is specified from –40°C to

+125°C.

Device Information(1)

PART NUMBER

PACKAGE

BODY SIZE (NOM)

TLV172

SOIC (8)

4.90 mm × 3.91 mm

SC70 (5)

2.00 mm × 1.25 mm

SOT-23 (5)

2.90 mm × 1.60 mm

TLV2172

SOIC (8)

4.90 mm × 3.91 mm

VSSOP (8)

3.00 mm × 3.00 mm

TLV4172

SOIC (14)

8.65 mm × 3.91 mm

TSSOP (14)

5.00 mm × 4.40 mm

(1) For all available packages, see the orderable addendum at

the end of the data sheet.

Simplified Schematic