1. The products and the product specifications described in this document are subject to change or discontinuation of

production without notice for reasons such as improvement. Therefore

, before deciding to use the products, please refer

to our sales representatives for the latest information thereon.

2. The materials in this document may not be copied or otherwise reproduced in whole or in part without prior written

consent of our company.

3. Please be sure to take any necessary formalities under relevant laws or regulations before exporting or otherwise

taking out of your country the products or the technical information described herein.

4. The technical information described in this document shows typical characteristics of and example application circuits

for the products. The release of such information is not to be construed as a warranty of or a grant of license under

our company's or any third party's intellectual property rights or any other rights.

5. The products listed in this document are intended and designed for use as general electronic components in standard

applications (office equipment, telecommunication equipment, measuring instruments, consumer electronic products,

amusement equipment etc.). Those customers intending to use a product in an application requiring extreme quality and

reliability, for example, in a highly specific application where the failure or misoperation of the product could result in

human injury or death (aircraft, spacevehicle, nuclear reactor control system, traffic control system, automotive and

transportation equipment, combustion equipment, safety devices, life support system etc.) should first contact us

.

6. We are making our continuous effort to improve the quality and reliability of our products, but semiconductor products

are likely to fail with certain probability. In order to prevent any injury to persons or damages to property resulting from

such failure, customers should be careful enough to incorporate safety measures in their design, such as redundancy

feature, fire containment feature and fail-safe feature. We do not assume any liability or responsibility for any loss or

damage arising from misuse or inappropriate use of the products

.

7. Anti-radiation design is not implemented in the products described in this document.

8. The X-ray exposure can influence functions and characteristics of the products. Confirm the product functions and

characteristics in the evaluation stage

.

9. WLCSP products should be used in light shielded environments. The light exposure can influence functions and

characteristics of the products under operation or storage

.

10. There can be variation in the marking when different AOI (Automated Optical Inspection) equipment is used. In the case

of recognizing the marking characteristic with AOI

, please contact our sales or our distributor before attempting to use

AOI

.

11. Please contact our sales representatives should you have any questions or comments concerning the products or

the technical information

.

Official website

https://www.nisshinbo-microdevices.co.jp/en/

Purchase information

https://www.nisshinbo-microdevices.co.jp/en/buy/