| 数据搜索系统,热门电子元器件搜索 |
|
C11 数据表(PDF) 5 Page - ams-OSRAM AG |
|
|
|||||||||||||||||||||||||||||
C11 数据表(HTML) 5 Page - ams-OSRAM AG |
|
5 / 72 page ![]() AS3688 austriami crosyst ems Datasheet, Confidential www.austriamicrosystems.com (ptr,tje) Revision 1.1.1 / 20060707 3 - 70 Revision History Revision Date Owner Description 1.0 30.3.2006 tje,ptr - Fixed typo for vtuning range - Corrected full scale value for current sinks from 38.5mA to 38.25mA (blockdiagram and one overview) - Typical CP power consumption updated - Reduced CP effective resistance in 1:2 mode, efficiency, Vcpout updated, quiescent current consumption - Efficiency diagram of CP added - Changed charge pump output capacitor to 1.5uF minimum - Changed default state for curr_3x_on_cp to 0 - Updated ASIC ID1 and ID2 register position - Updated LED Testing procedure - Updated Mode Switching Diagram (and->or) - Register Map Table updated - slow LED pattern (bit pattern_slow added) - GPIO2 current source modified - polarity control of external overtemp comparator added - Increased standby current consumption by 2uA - Added comment to avoid current source on and 0mA setting - Added comment for preview_off_after strobe - Removed cp_start_debounce - Added comment not to use softdim_pattern for CURR1,CURR2 and CURR3x mode ‘Other’ - Added comment for order of setting of pattern_data - Changed to ‘Datasheet’ from ‘Preliminary Datasheet’ 1.1 23.6.2006 tje,ptr - Update Application Diagram - Included AS3688B version (for CURR42, CURR43) - Improved Current Sink Matching to 8%; added comment for current sink voltage compliance for accuracy spec - Updated minimum value C6,C7 - Updated Vrsense* (DCDC step up) - Replaced ‘FuseReg*’ by their actual default value - TTOL +/-5°move from min/max to typical value and removed comment ‘Design Target’ - Added comment about ADC Reference (V2_5) - Improved voltage compliance of RGB current sinks to V(CPOUT) - Removed CSP Version (use austriamicrosystems AS3689) - Added ADC Temperature measurement coefficients - Removed fuse I2C_Add (replace by comment about factory programmability) - Added comment in LED test for reduced settling time for the DCDC step up converter - Added DCDC efficiency curve - Added ICP1_1.5 and ICP1_2 max. - Added VPGIO rising max; and comment for VPOR_VBAT - Added comment for LDO startup 1.1.1 7.7.2006 tje,ptr - Added maximum value for IACTIVE - Added maximum value for ILIMIT - Reduced ICP1_1.5 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |