| 数据搜索系统,热门电子元器件搜索 |
|
C11 数据表(PDF) 7 Page - ams-OSRAM AG |
|
|
|||||||||||||||||||||||||||||
C11 数据表(HTML) 7 Page - ams-OSRAM AG |
|
7 / 72 page ![]() AS3688 austriami crosyst ems Datasheet, Confidential www.austriamicrosystems.com (ptr,tje) Revision 1.1.1 / 20060707 5 - 70 5 Characteristics 5.1 Absolute Maximum Ratings Stresses beyond those listed in Table 1 may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in Section 5 Electrical Characteristics is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Table 1 – Absolute Maximum Ratings Symbol Parameter Min Max Unit Note VIN_HV 15V Pins -0.3 17 V Applicable for high-voltage current sink pins CURR1 and CURR2. VIN_MV 5V Pins -0.3 7.0 V Applicable for 5V pins VBAT1:VBAT3, VANA1, CURR30:CURR33; C1_N, C2_N, C1_P, C2_P, CPOUT; SENSE_N, SENSE_P, DCDC_FB, DCDC_GATE; CURR41:CURR43, RGB1,RGB2,RGB3(VANA2). VIN_LV 3.3V Pins -0.3 5.0 V Applicable for 3.3V pins VDD_GPIO; GPIO0:GPIO2; GPI; serial interface pins CLK, DATA; V2_5; RBIAS, CREF IIN Input Pin Current -25 +25 mA At 25ºC, Norm: JEDEC 17 Tstrg Storage Temperature Range -55 125 ºC Humidity 5 85 % Non-condensing VESD Electrostatic Discharge -1000 1000 V Norm: MIL 883 E Method 3015 1 W TA = 70 degrees, Tjunction max = 125deg Pt Total Power Dissipation QFN32 5x5 2.5 W TA = 70 degrees, Tjunction max = 125deg; for 800ms TBODY Peak Body Temperature 260 ºC T = 20 to 40s, in accordance with IPC/JEDEC J-STD 020C. 5.2 Operating Conditions Table 2 – Operating Conditions Symbol Parameter Min Typ Max Unit Note VHV High Voltage 0.0 15.0 V Applicable for high-voltage current sink pins CURR1 and CURR2. VBAT Battery Voltage 3.0 3.6 5.5 VBAT1:VBAT3 VGPIO Periphery Supply Voltage 1.5 3.3 V For GPIO and serial interface pins. V2_5 Voltage on Pin V2_5 2.4 2.5 2.6 V Internally generated TAMB Operating Temperature Range -30 25 85 °C IACTIVE Battery current 64 130 µA Normal Operating current – see section ‘Operating Modes’ (excluding current of the enabled blocks, e.g. LDOs, DCDC); interface active |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |