R5F566TFCDFB datasheet(75/151 Pages) RENESAS

75 / 151 page

R01DS0315EJ0130 Rev.1.30

Page 75 of 151

Oct 06, 2023

RX66T Group

2. Electrical Characteristics

Note 1. Supply current values are measured when all output pins are unloaded and all input pull-up resistors are disabled.

Note 2. Peripheral module clocks are supplied. This does not include operations as BGO (background operations).

Note 3. ICC depends on f (ICLK) as follows.

(when ICLK : PCLKA : PCLKB : PCLKC : PCLKD : BCLK : BCLK pin = 4 : 2 : 1 : 4 : 1 : 1 : 1 and EXTAL = 16 MHz)

• G version product

ICC Max. = 0.394 × f + 19 (full operation in normal operating mode)

ICC Typ. = 0.099 × f + 5 (normal operation in normal operating mode)

ICC Max. = 0.144 × f + 19 (sleep mode)

Note 4. This does not include operations as BGO (background operations). Whether the peripheral module clocks are supplied or

stopped is controlled only by the bit settings in the module stop control registers A to D.

Note 5. When peripheral module clocks are stopped, each clock frequency is set for division by 64, and the frequencies of FCLK, BCLK,

PCLKA, PCLKB, PCLKC, PCLKD, and the BCLK pin are the same.

Note 6. This is an increase caused by program/erase operation to the code flash memory or data flash memory during executing the

user program.

Table 2.7

DC Characteristics (3) (Products with 64 Kbytes of RAM, G version)

Conditions: VCC = 2.7 to 5.5 V, VCC_USB = 2.7 to 5.5 V, AVCC0 = AVCC1 = AVCC2 = 3.0 to 5.5V,

VSS = VSS_USB = AVSS0 = AVSS1 = AVSS2 = 0 V,

Ta = Topr

Item

Symbol

G version

Unit

Test Conditions

Min.

Typ.

Max.

Supply

current*1

Full operation*2

ICC*3

—

ICLK = 160 MHz

PCLKA = 80 MHz

PCLKB = 40 MHz

PCLKC = 160 MHz

PCLKD = 40 MHz

FCLK = 40 MHz

BCLK = 40 MHz

BCLK pin = 40 MHz

Normal

operation

Peripheral module clocks are supplied*4

—21—

Peripheral module clocks are stopped

*4, *5

—12—

CoreMark

Peripheral module clocks are stopped

*4, *5

—21—

Sleep mode: Peripheral module clocks are

supplied*4

—18

All module clock stop mode (reference value)

—

9.4

Increase current by BGO operation*6

—13—

Increase current by operating Trusted Secure IP

—

3.9

5.0

Software standby mode

—

0.9

11.2

VOLSR.PGAVLS = 1

Deep software standby mode

—

µA

VOLSR.PGAVLS = 1

R5F566TFCDFB 数据表(PDF) 75 Page - Renesas Technology Corp

R5F566TFCDFB 数据表(HTML) 75 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载