FH-Series

29

Ratings and Specifications (FH Sensor Controllers)

High-speed, Large-capacity Controller

*1 According to the CPU performance, FH-2050 series is recommended to use up to two lines in this mode.

*2 Up to eight cameras can be connected in total including up to four 12 or 20.4 million-pixel cameras.

*3 Existing third class grounding

Sensor Controller Series

FH-5550/5050 Series

FH-2050 Series

Sensor Controller Model

FH-5550/5050

FH-5550/5050-10

FH-5550/5050-20

FH-2050

FH-2050-10

FH-2050-20

Parallel IO

NPN/PNP (common)

Memory, Storage

FH-5550 series : 32GB RAM, 64GB ROM

FH-5050 series : 8GB RAM, 32GB ROM

8GB RAM, 32GB ROM

Number of cores

4 cores

2 cores

Main

Functions

Operation

Mode

Standard

Yes

Double Speed Multi-input

Yes

Non-stop adjustment mode

Yes

Multi-line random-trigger mode

Yes (Maximum 8 lines) *1

Parallel Processing

Yes

Number of Connectable Camera

248248

Supported

Camera

FH-S series camera

All of the FH-S series cameras are

connectable.

All of the FH-S series

cameras are

connectable. *2

All of the FH-S series cameras are

connectable.

All of the FH-S series

cameras are

connectable. *2

FZ-S series camera

All of the FZ-S series cameras are connectable.

Camera I/F

OMRON I/F

Possible Number of Captured Images

Refer to page 31.

Possible Number of Logging Images to Sensor Controller Refer to the Vision System FH Series User's Manual (Cat. No. Z365).

Possible Number of Scenes

128

Operating

on UI

USB Mouse

Yes (wired USB and driver is unnecessary type)

Touch Panel

Yes (RS-232C/USB connection: FH-MT12)

Setup

Create the processing flow using Flow editing.

Language

Japanese, English, Simplified Chinese, Traditional Chinese, Korean, German, French, Spanish, Italian, Vietnamese, Polish

External

Interface

Serial Communication

RS-232C

× 1

Ethernet

Communication

Protocol

Non-procedure (TCP/UDP)

I/F

1000BASE-T

× 2

EtherNet/IP Communication

Yes (Target/Ethernet port)

PROFINET Communication

• Yes (Slave/Ethernet port)

• Conformance class A

EtherCAT Communication

Yes (slave) Refer to page 36 about EtherCAT Communications Specifications.

Parallel I/O

• 12 inputs/31 outputs:

• Use 1 Line.

• Operation mode: Except Multi-line random-trigger mode.

• 17 inputs/37 outputs:

• Use 2 Lines.

• Operation mode: Multi-line random-trigger mode.

• 14 inputs/29 outputs:

• Use 3 to 4 Lines.

• Operation mode: Multi-line random-trigger mode.

• 19 inputs/34 outputs:

• Use 5 to 8 Lines.

• Operation mode: Multi-line random-trigger mode.

Encoder Interface

Input voltage: 5 V

± 5%

Signal: RS-422A Line Driver Level

Phase A/B/Z: 1 MHz

Monitor Interface

DVI-I output (Analog RGB & DVI-D single link)

× 1

USB I/F

USB3.0 host

× 2 (BUS Power: Port5 V/0.5 A)

USB2.0 host

× 4 (BUS Power: Port5 V/0.5 A)

SD Card I/F

SDHC

× 1

Indicator

Lamps

Main

POWER: Green

ERROR: Red

RUN: Green

ACCESS: Yellow

Ethernet

NET RUN1: Green

LINK/ACT1: Yellow

NET RUN2: Green

LINK/ACT2: Yellow

SD Card

SD POWER: Green

SD BUSY: Yellow

EtherCAT

ECAT RUN: Green

LINK/ACT IN: Green

LINK/ACT OUT: Green

ECAT ERR: Red

Power-supply voltage

20.4 VDC to 26.4 VDC

Current

consumption

When connecting an intelligent compact digital camera

• When connecting the following light or lighting

controller without an external power supply

FLV-TCC1, FLV-TCC4, FLV-TCC3HB

FLV-TCC1EP, FL-TCC1

• When connecting the following light or light-

ing controller

FL-TCC1PS, FL-MD

@MC

5.6 A max.

7.7 A max.

12.2 A max.

4.6 A max.

6.6 A max.

11.2 A max.

Other than above

4.5 A max.

5.5 A max.

7.3 A max.

3.5 A max.

4.3 A max.

6.3 A max.

Built-in FAN

Yes

Usage

Environment

Ambient temperature range

Operating: 0

°C to +45°C

Storage: -20 to +65

°C (with no icing or condensation)

Operating: 0

°C to +50°C

Storage: -20 to +65

°C (with no icing or condensation)

Ambient humidity range

Operating:35 to 85%RH

Storage: 35 to 85%RH (with no condensation)

Ambient atmosphere

No corrosive gases

Vibration tolerance

Oscillation frequency: 10 to 150 Hz

Half amplitude: 0.1 mm

Acceleration: 15 m/s2

Sweep time: 8 minute/count

Sweep count: 10

Vibration direction: up and down/front and behind/left and right

Shock resistance

Impact force: 150 m/s2

Test direction: up and down/front and behind/left and right

Noise

immunity

Fast Transient Burst

• DC power

Direct infusion: 2kV, Pulse rising: 5ns, Pulse width: 50ns, Burst continuation time: 15ms/0.75ms, Period: 300ms, Application time: 1 min

•I/O line

Direct infusion: 1kV, Pulse rising: 5ns, Pulse width: 50ns, Burst continuation time: 15ms/0.75ms, Period: 300ms, Application time: 1 min

Grounding

Type D grounding (100

Ω or less grounding resistance) *3

External

Features

Dimensions

190 mm

× 115 mm × 182.5 mm

Note Height: Including the feet at the base.

Weight

Approx. 3.4 kg

Approx. 3.6 kg

Approx. 3.6 kg

Approx. 3.0 kg

Approx. 3.2 kg

Approx. 3.2 kg

Degree of protection

IEC60529 IP20

Case material

Cover: zinc-plated steel plate

Side plate: aluminum (A6063)

Accessories

Instruction Sheet (Japanese and English): 1, Installation Instruction Manual for FH series:1,

General Compliance Information and Instructions for EU:1, Member registration sheet: 1, Power source (FH-XCN): 1 (male),

Ferrite core for camera cable: 2 (FH-5

@50, FH-2050), 4 (FH-5@50-10, FH-2050-10), 8 (FH-5@50-20, FH-2050-20)