FZ-SSLASHSC datasheet(40/54 Pages) OMRON

40 / 54 page

FH-Series

*1 2D Codes that can be read : Data Matrix (ECC200)

*2 2D Codes that can be read : Data Matrix (ECC200), QR Code

*3 Bar Codes that can be read : JAN/EAN/UPC (including add-on codes),

Code 39, Codabar (NW-7), ITF (Interleaved 2 of 5), Code 93, Code 128,

GS1-128, GS1 DataBar (RSS-14 / RSS Limited / RSS Expanded),

Pharmacode

*4 Available on the following controllers:

•FH-5

@50/2050 Series (version 6.40 or later)

• FH-L551-

@@ (Use in conjunction with 0.3 or 0.4 million-pixel cameras.)

*5 Available on the FH-5

@50-series Controller (version 6.40 or later).

Optional FH-UMAI1 Scratch Detect AI Software Installer is required.

Group

Icon

Processing Item

Corresponding

Page in the

Catalog

Support

measure-

ment

User Data

Used for setting of the data that can be

used as common constants and variables

in scene group data.

Set Unit Data

Used to change the ProcItem data (setting

parameters, etc.) that has been set up in a

scene.

Get Unit Data

Used to get one data (measured results,

setting parameters, etc.) of ProcItem that

has been set up in a scene.

Set Unit Figure

Used for re-setting the figure data (model,

measurement area ) registered in an unit.

Get Unit Figure

Used for get the figure data (model, mea-

surement area ) registered in an unit.

Trend Monitor

Used for displaying the information about

results on the monitor, facilitating to avoid

NG and analyze causes.

Image Logging

Used for saving the measurement images

to the memory and USB memory.

Image

Conversion

Logging

Used for saving the measurement images

in JPEG and BMP format.

Data Logging

Used for saving the measurement data to

the memory and USB memory.

Elapsed Time

Used for calculating the elapsed time

since the measurement trigger input.

Wait

Processing is stopped only at the set time. The

standby time is set by the unit of [ms].

Focus

Focus setting is supported.

Iris

Focus and aperture setting is supported.

Parallelize

A part of the measurement flow is divided

into two or more tasks and processed in

parallel to shorten the measurement time.

This processing item is placed at the top of

processing to be performed in parallel.

Parallelize Task

A part of the measurement flow is divided

into two or more tasks and processed in

parallel to shorten the measurement time.

This processing item is placed immediate-

ly before processing to be performed in

parallel between Parallelize and Paral-

lelize End.

Statistics

Used when you need to calculate an aver-

age of multiple measurement results.

Reference Calib

Data

Calibration data and distortion compensa-

tion data held under other processing

items can be referenced.

Position Data

Calculation

The specified position angle is calculated

from the measured positions.

Stage Data

Sets and stores data related to stages.

P13

Robot Data

Sets and stores data related to robots.

Vision Master

Calibration

This processing item automatically calcu-

lates the entire axis movement amount of

the control equipment necessary for cali-

bration.

PLC Master

Calibration

Calibration data is created using a com-

munication command from PLC.

Convert Position

Data

The position angle after the specified axis

movement is calculated.

Movement

Single Position

The axis movement that is required to

match the measured position angle to the

reference position angle is calculated.

Movement Multi

Points

The axis movements that are required to

match the measured position angles to the

corresponding reference position angles

are calculated.

Detection Point

Obtains position/angle information by re-

ferring to the coordinate values measured

with the Measurement Processing Unit.

Manual Position

Setting

Used to change the measurement coordi-

nates X and Y of the measurement pro-

cessing unit.

Camera

Calibration

By setting the camera calibration, the

measurement result can be converted and

output as actual dimensions.

Data Save

The set data can be saved in the controller

main unit or as scene data. The data is

held even after the FH/FZ power is turned

off.

Conveyor

Calibration

Conveyor Calibration is used to calibrate

camera, conveyor, and robots for convey-

or tracking application.

Scene

The specified scene is copied to the cur-

rent scene.

System

Information

Obtain system information (e.g., memory

and disk space and I/O input signal status)

of the Sensor Controller.

Group

Icon

Processing Item

Corresponding

Page in the

Catalog

Branch

Conditional

Branch

Used where more than two kinds of prod-

ucts on the production line need to detect-

ed separately.

End

This ProcItem must be set up as the last

processing unit of a branch.

DI Branch

Same as ProcItem "Branch". But you can

change the targets of conditional branch-

ing via external inputs.

Control Flow

Normal

Set the measurement flow processing into

the wait state in which the specific no-pro-

tocol command can be executed.

Control Flow

PLC Link

Set the measurement flow processing into

the wait state in which the specific PLC

Link command can be executed.

Control Flow

Parallel

Set the measurement flow processing into

the wait state in which the specific parallel

command can be executed.

Control Flow

Fieldbus

Set the measurement flow processing into

the wait state in which the specific Field-

bus command can be executed.

Selective Branch Easily branch to multiple destinations.

Conditional

Execution (If)

The measurement flow is divided accord-

ing to the comparison result obtained us-

ing the set expressions and conditions.

Conditional

Execution (Else)

Insert between the Conditional Execution

(If) processing item and End If processing

item. The measurement flow is divided ac-

cording to the comparison result obtained

using the set expressions and conditions.

Loop

The set processes are repeated until the

loop count reaches the specified number,

and then the next process starts.

Loop

Suspension

Insert between the Loop processing item

and End Loop processing item. Used to

stop the loop before the loop count reach-

es the specified number.

Select Execution

(Select)

Used to set conditions. The measurement

flow is divided according to the compari-

son result obtained using the conditions

given by expressions.

Select Execution

(Case)

Used to make a judgment. The measure-

ment flow is divided according to the com-

parison result obtained using the

conditions given by expressions.

Output result

Result Output (I/

Output data to the external devices such

as a programmable controller or a PC via

PLC Link, Parallel interface, Fieldbus in-

terface (EtherCAT, EtherNet/IP (other

than message communication), PROF-

INET).

Result Output

(Message)

Output data to the external devices such

as a programmable controller or a PC with

non-procedure mode via the serial inter-

face or EtherNet/IP (message communi-

cation). This processing item allows you to

save the logging data as a “.csv” file into

the Sensor Controller as well.

Data Output

Used when you need to output data to the

external devices such as PLC or PC via

serial ports.

Parallel Data

Output

Used when you need to output data to the

external devices such as PLC or PC via

parallel ports.

Parallel

Judgement

Output

Used when you need to output judgement

results to the external devices such as

PLC or PC via parallel ports.

Fieldbus Data

Output

Outputs data to an external device, such

as a Programmable Controller, through a

fieldbus interface.

Display result

Result Display

Used for displaying the texts or the figures

in the camera image.

Display Image

File

Display selected image file.

Display Last NG

Image

Display the last NG images.

Conveyor

Panorama

Display

Display images of the tracking area as a

panoramic image.

Display Image

Hold

Processing item to retain images, includ-

ing measurement results.

FZ-S/SC 数据表(PDF) 40 Page - Omron Electronics LLC

FZ-S/SC 数据表(HTML) 40 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

数据表下载

链接网址

FZ-S/SC 数据表(PDF) 40 Page - Omron Electronics LLC

FZ-S/SC 数据表(HTML) 40 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

数据表 下载

链接网址

数据表下载