 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
T410 数据表(PDF) 67 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
T410 数据表(HTML) 67 Page - STMicroelectronics |
|
|
67 / 84 page  ST52T410/ST52T420/E420 67/84 Table 11.1 Voltage Characteristics Symbol Ratings Maximum Value Unit VDD-VSS Supply voltage 6.5 V VDDA-VSSA Analog reference voltage(VDD≥VDDA)6.5 |∆V DDA|and |∆VSSA| Variation between different digital power pins 50 mV |VSSA-VSSX| Variation between digital and analog ground pins 50 VIN Input voltage on Vpp VSS-0.3 to 13 V Input voltage on any other pin 1) & 2) VSS-0.3 to VDD+0.3 VDESD Electro-static discharge voltage 2000 Table 11.2 Current Characteristics Symbol Ratings Maximum Value Unit IVDD Total current in VDD power lines (source) 3) 100 mA IVSS Total current in VSS ground lines (sink) 3) 100 IIO Standard Output Source Sink current ±16 IINJ(PIN) Injected current on VPP pin ±5 Injected current on RESET pin ±5 Injected current on OSCin and OSCout pins ±5 Injected current on any other pin 4) ±5 ΣIINJ(PIN) Total Injected current (sum of all I/O and control pins) 4) ±20 Table 11.3 Thermal Characteristics Symbol Ratings Maximum Value Unit TA Operating temperature -25 to +85 °C TSTG Storage temperature range -65 to +150 °C TJ Maximum junction temperature 150 °C Notes: 1. Connecting RESET and I/O Pins directly to VDD or VSS could damage the device if the unintentional internal reset is generated or an unexpected change of I/O configuration occurs (for example, due to the corrupted program counter). In order to guarantee safe operation, this connection has to be performed via a pull-up or pull-down resistor (typical: 4.7k Ω for RESET, 10K Ω for I/Os). Unused I/O pins must be tied in the same manner to VDD or VSS according to their reset configuration. 2. When the current limitation is not possible, the VIN absolute maximum rating must be respected, otherwise refer to I INJ(PIN) specification. A positive injection is induced by VIN>VDD while a negative injection is induced by VIN<VSSto I INJ(PIN) specification. A positive injection is VIN>VDD while a negative injection is induced by VIN<VSS. 3. All power (VDD) and ground (VSS) lines must always be connected to the external supply. 4. When several inputs are submitted to a current injection, the maximum ΣI INJ(PIN) is the absolute sum of the positive and negative injected currents (instantaneous values). |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
