STMPE2403 datasheet(44/63 Pages) STMICROELECTRONICS

44 / 63 page

PWM controller

STMPE2403

44/63

Instruction

Description

LOAD

Load the PWM counter with a value between 0x0 and 0xFF.

PWM value: (0-255)

Loads an absolute value between 0-255 into PWM count

Go to Start (GTS) Branch to the address 0x0 and execute from 0x0 and onwards.

BRANCH

This instruction loads the Step Number into the instruction counter

Loop Count: (0-63)

Number of loops to repeat. 0 means infinite loop

Addr: (0 or 1)

0 – Absolute addressing

1 – Relative addressing

Step Size: (0-63)

The step number to be loaded to instruction counter

END

End the instruction execution by resetting and interrupting to the host.

Trigger (TRIG)

Capable of waiting as well as sending triggers to another PWM channel. Can be

configured to send/receive external trigger

Wait For Trigger

Bit 7: Channel 0

Bit 8: Channel 1

Bit 9: Channel 2

Bit 12: External Trigger Input

Send Trigger

Bit 1: Channel 0

Bit 2: Channel 1

Bit 3: Channel 2

Bit 6: External Trigger Output

Table 43. Identification of Instructions

Instruction

Bit 15

Bit 14

Bit 13

Ramp

LOAD

GoToStart

Branch

101

End

110

Trigger

111

Reserved

100

Table 42. PWM commands (continued)

STMPE2403 数据表(PDF) 44 Page - STMicroelectronics

STMPE2403 数据表(HTML) 44 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63

数据表下载