ST6208LD3SLASHOTP datasheet(78/104 Pages) STMICROELECTRONICS

78 / 104 page

ST6208C/ST6209C/ST6210C/ST6220C

78/104

EMC CHARACTERISTICS (Cont’d)

10.7.2 Absolute Electrical Sensitivity

Based on three different tests (ESD, LU and DLU)

using specific measurement methods, the product

is stressed in order to determine its performance in

terms of electrical sensitivity. For more details, re-

fer to the AN1181 application note.

10.7.2.1 Electro-Static Discharge (ESD)

Electro-Static Discharges (3 positive then 3 nega-

tive pulses separated by 1 second) are applied to

the pins of each sample according to each pin

combination. The sample size depends of the

number of supply pins of the device (3 parts*(n+1)

supply pin). Two models are usually simulated:

Human Body Model and Machine Model. This test

conforms to the JESD22-A114A/A115A standard.

See Figure 57 and the following test sequences.

Human Body Model Test Sequence

– CL is loaded through S1 by the HV pulse gener-

ator.

– S1 switches position from generator to R.

– A discharge from CL through R (body resistance)

to the ST6 occurs.

– S2 must be closed 10 to 100ms after the pulse

delivery period to ensure the ST6 is not left in

charge state. S2 must be opened at least 10ms

prior to the delivery of the next pulse.

Machine Model Test Sequence

– CL is loaded through S1 by the HV pulse gener-

ator.

– S1 switches position from generator to ST6.

– A discharge from CL to the ST6 occurs.

– S2 must be closed 10 to 100ms after the pulse

delivery period to ensure the ST6 is not left in

charge state. S2 must be opened at least 10ms

prior to the delivery of the next pulse.

– R (machine resistance), in series with S2, en-

sures a slow discharge of the ST6.

Absolute Maximum Ratings

Notes:

1. Data based on characterization results, not tested in production.

Figure 57. Typical Equivalent ESD Circuits

Symbol

Ratings

Conditions

Maximum value 1)

Unit

VESD(HBM)

Electro-static discharge voltage

(Human Body Model)

TA=+25°C

2000

VESD(MM)

Electro-static discharge voltage

(Machine Model)

TA=+25°C

200

ST6

R=1500

Ω

HIGH VOLTAGE

CL=100pF

PULSE

GENERATOR

ST6

HIGH VOLTAGE

CL=200pF

PULSE

GENERATOR

HUMAN BODY MODEL

MACHINE MODEL

ST6208LD3/OTP 数据表(PDF) 78 Page - STMicroelectronics

ST6208LD3/OTP 数据表(HTML) 78 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载