AT89C5131A-RDTIL datasheet(2/186 Pages) ATMEL

2 / 186 page

AT89C5131A-L

4338F–USB–08/07

Description

AT89C5131A-L is a high-performance Flash version of the 80C51 single-chip 8-bit

microcontrollers with full speed USB functions.

AT89C5131A-L features a full-speed USB module compatible with the USB specifica-

tions Version 1.1 and 2.0. This module integrates the USB transceivers with a 3.3V

voltage regulator and the Serial Interface Engine (SIE) with Digital Phase Locked Loop

and 48 MHz clock recovery. USB Event detection logic (Reset and Suspend/Resume)

and FIFO buffers supporting the mandatory control Endpoint (EP0) and up to 6 versatile

Endpoints (EP1/EP2/EP3/EP4/EP5/EP6) with minimum software overhead are also part

of the USB module.

AT89C5131A-L retains the features of the Atmel 80C52 with extended Flash capacity

(32-Kbyte), 256 bytes of internal RAM, a 4-level interrupt system, two 16-bit

timer/counters (T0/T1), a full duplex enhanced UART (EUART) and an on-chip

oscillator.

In addition, AT89C5131A-L has an on-chip expanded RAM of 1024 bytes (ERAM), a

dual- data pointer, a 16-bit up/down Timer (T2), a Programmable Counter Array (PCA),

up to 4 programmable LED current sources, a programmable hardware watchdog and a

power-on reset.

AT89C5131A-L has two software-selectable modes of reduced activity for further reduc-

tion in power consumption. In the idle mode the CPU is frozen while the timers, the

serial ports and the interrupt system are still operating. In the power-down mode the

RAM is saved, the peripheral clock is frozen, but the device has full wake-up capability

through USB events or external interrupts.

AT89C5131A-RDTIL 数据表(PDF) 2 Page - ATMEL Corporation