ATmega162 datasheet(70/324 Pages) ATMEL

70 / 324 page

2513K–AVR–07/09

ATmega162/V

Special Function IO

• Bit 2 – PUD: Pull-up Disable

When this bit is written to one, the pull-ups in the I/O ports are disabled even if the DDxn and

PORTxn Registers are configured to enable the pull-ups ({DDxn, PORTxn} = 0b01). See “Con-

figuring the Pin” on page 64 for more details about this feature.

Alternate Functions of

Port A

Port A has an alternate function as the address low byte and data lines for the External Memory

Interface and as Pin Change Interrupt.

Table 30 and Table 31 relate the alternate functions of Port A to the overriding signals shown in

Figure 32 on page 68.

Bit

TSM

XMBK

XMM2

XMM1

XMM0

PUD

PSR2

PSR310

SFIOR

Read/Write

R/W

Initial Value

Table 29. Port A Pins Alternate Functions

Port Pin

Alternate Function

PA7

AD7 (External memory interface address and data bit 7)

PCINT7 (Pin Change INTerrupt 7)

PA6

AD6 (External memory interface address and data bit 6)

PCINT6 (Pin Change INTerrupt 6)

PA5

AD5 (External memory interface address and data bit 5)

PCINT5 (Pin Change INTerrupt 5)

PA4

AD4 (External memory interface address and data bit 4)

PCINT4 (Pin Change INTerrupt 4)

PA3

AD3 (External memory interface address and data bit 3)

PCINT3 (Pin Change INTerrupt 3)

PA2

AD2 (External memory interface address and data bit 2)

PCINT2 (Pin Change INTerrupt 2)

PA1

AD1 (External memory interface address and data bit 1)

PCINT1 (Pin Change INTerrupt 1)

PA0

AD0 (External memory interface address and data bit 0)

PCINT0 (Pin Change INTerrupt 0)

ATmega162 数据表(PDF) 70 Page - ATMEL Corporation

ATmega162 数据表(HTML) 70 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载