| 数据搜索系统,热门电子元器件搜索 |
|
AS8510 数据表(PDF) 40 Page - ams AG |
|
|
|||||||||||||||||||||||||||||
AS8510 数据表(HTML) 40 Page - ams AG |
|
40 / 46 page ![]() www.austriamicrosystems.com/AS8510 Revision 3.4 40 - 46 AS8510 Datasheet - Detailed Descr i p ti on 7.9.4 Reconfiguring Gain Setting of PGA Only PGA gain settings can be changed dynamically while ADC conversions are in progress. When PGA gain settings are changed, the first sample from the ADC is invalid. Ignore the first interrupt after the gain re-configuration. Valid data starts from the second interrupt onwards. Figure 18. AS8510 - Reconfiguration of Gain Setting of PGA 7.9.5 Configuring the Device During Normal Mode Following registers can be programmed dynamically when the device is in operational mode (Normal mode). ACH_CTL_REG address is 0x17 PGA_CTL_REG address is 0x03 During the operation (Normal mode) of the device, if any of the registers need to be programmed or changed other than the above mentioned registers, then it is required to STOP the device by writing into MOD_CTL_REG “STOP” bit and configure the device as per the requirements and start the device. DATA-N DATA-N+1 D4 D1 D2 D3 D4 TDATA_STATUS_RD TDATA_VALID TDATA_INVALID INT CHOP_CLK Channel Data Register DATA1 DATA2 D2 D3 D4 D1 D2 D3 D4 D1 D2 D3 D4 TDATA_STATUS_RD TDATA_VALID TDATA_INVALID D1 TDATA_STATUS_RD Gain Re-Configuration can be carried out in this slot, skip next interrupt and Channel Data. Read Channel data in this slot VALID DATA |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |