AS8221

Datasheet - Application In form atio n

www.austriamicrosystems.com/flexray/AS8221

Revision 1.7

27 - 42

Figure 14. Timing Characteristics (BGE

 BUS)

In NORMAL and RECEIVE-ONLY mode, the transmitter drives on the bus Idle in case no data are transmitted. In STANDBY, GO-TO-SLEEP and

SLEEP mode the transmitter drives Idle_LP on the bus pins. In POWER-OFF mode the bus pins shows Idle_HZ.

9.10 Receiver

The Receiver generates from the FlexRay differential bus voltage a digital signal on the RxD and RxEN pins. RxD shows the data (Data0 and

Data1) and RxEN shows the bus idle and activity status received on the bus pins. The Receiver is only active in NORMAL and RECEIVE-ONLY

mode.

Figure 15. Timing Characteristics of the Bus Signals to RxD and RxEN

300 mV

-300 mV

300 mV

-300 mV