www.ti.com

MSP-EXP430F5529 Hardware

There are also other jumpers available for current measurement, disconnection of certain peripherals, and

other advanced options (see Table 1). The black line on the board below the jumpers JP8 (LDO) and

JP11 (JTAG) indicates the default jumper position.

Table 1. MSP-EXP430F5529 Jumper Settings and Functionality

Functionality When Jumper

Header

Functionality When Jumper Present

Absent

JP2

– POT

Connects pin P8.0 to potentiometer

Disconnects pin P8.0 to

potentiometer

JP3

– LED1

Connects pin P1.0 to LED1

Disconnects pin P1.0 to LED1

JP6

– 430 PWR

MSP430F5529 is not powered.

Provides power to MSP430F5529. Also used to measure current

consumption of the MSP430F5529.

NOTE:

The two large vias near the

"430 PWR" label on the PCB

are connected to JP6 as well.

These vias can be used to

easily connect a test lead onto

the PCB for current

consumption measurement.

JP7

– SYS PWR

Provides power to the entire MSP-EXP430F5529 board. Also

MSP-EXP430F5529 Experimenter

used to measure current consumption of the entire board.

Board system devices are not

powered.

JP8

– LDO

No connection to MSP430 V

Only applicable when powering via

"5529 USB" connection.

powered via

"5529 USB".

ALT (Default): Connects the alternate LDO (TPS73533) to the

MSP430 VCC.

INT: Connects the internal

'F5529 LDO to the MSP430 V

JP11

– JTAG

JTAG tool does NOT provide power

Only applicable when powering via JTAG connection.

to system.

EXT (Default): JTAG tool does NOT provide power to system.

INT: JTAG tool will provide power to system.

JP14

– RF PWR

Connects system V

RF headers: J12, J13, and RF2 do

not have power.

JP15

– USB PWR

Connects USB 5-V power to MSP430F5529 and Alternate LDO

USB 5-V power not connected to

(TPS73533).

system.

JP16

– eZ-FET

No connection between

DVCC: Connects MSP430 V

Connection

MSP430F5529 and the eZ-FET.

TXD / RXD: Connects UART between F5529 and eZ-FET.

RST / TEST: Connects Spy-Bi-Wire JTAG between F5529 and

eZ-FET.

19

SLAU330A

– May 2011 – Revised June 2011

MSP-EXP430F5529 Experimenter Board

Submit Documentation Feedback

Copyright

© 2011, Texas Instruments Incorporated