Preface

SLAU330A

– May 2011 – Revised June 2011

Read This First

If You Need Assistance

The primary sources of information for MSP430 devices are the data sheets and the family user's guides.

The most up-to-date versions of these documents can be found at www.ti.com/msp430.

Information specific to the MSP-EXP430F5529 Experimenter Board can be found at www.ti.com/usbexp.

Customer support for MSP430 devices and the MSP-EXP430F5529 Experimenter Board is provided by

the Texas Instruments Product Information Center (PIC), as well as on the TI E2E (Engineer-2-Engineer)

Forum at the link below.

Contact information for the PIC can be found on the TI web site at: support.ti.com.

The MSP430 Specific E2E forum is located at: community.ti.com/forums/12.aspx.

Related Documentation from Texas Instruments

MSP-EXP430F5529 Experimenter Board User's Guide (SLAU330)

MSP-EXP430F5529 Experimenter Board User Experience Software

MSP-EXP430F5529 Experimenter Board Quick Start Guide (SLAU339)

MSP-EXP430F5529 Experimenter Board PCB Design Files (SLAR055)

MSP430F552x Code Examples (SLAC300)

FCC Warning

This equipment is intended for use in a laboratory test environment only. It generates, uses, and can

radiate radio frequency energy and has not been tested for compliance with the limits of computing

devices pursuant to subpart J of part 15 of FCC rules, which are designed to provide reasonable

protection against radio frequency interference. Operation of this equipment in other environments may

cause interference with radio communications, in which case the user, at his own expense, will be

required to take whatever measures may be required to correct this interference.

5

SLAU330A

– May 2011 – Revised June 2011

Preface

Submit Documentation Feedback

Copyright

© 2011, Texas Instruments Incorporated