www.ti.com

User Experience Software

2

User Experience Software

2.1

Introduction

The MSP-EXP430F5529 Experimenter Board arrives with a User Experience application installed to

demonstrate a few of the capabilities of the MSP430F5529. Set the power switch to "LDO", and connect

your PC to the "5529 USB" connection as shown in Figure 2. A splash screen displaying the TI logo

should appear on the LCD. Wait approximately three seconds, or press either the S1 or S2 button, to

display the Main Menu. Use the thumb wheel to navigate up and down the menu items on the LCD

screen. Press the S1 pushbutton to enter a selection, or press the S2 pushbutton to cancel.

Figure 2. User Experience Navigation

2.2

Main Menu

The main menu displays a list of applications and settings that demonstrate key features of the

MSP430F5529. Use the thumb wheel on the bottom right of the PCB to scroll up and down through the

menu options. Use the push-buttons to enter and exit menu items. Press S1 to enter a menu item. Press

S2 to return to a previous menu or to cancel an operation. Each application in the main menu is described

in the following sections.

9

SLAU330A

– May 2011 – Revised June 2011

MSP-EXP430F5529 Experimenter Board

Submit Documentation Feedback

Copyright

© 2011, Texas Instruments Incorporated