www.ti.com

Software Installation and Debugging

You may be prompted to update the firmware on the MSP-FET430UIF programmer. Do not be concerned;

click the button that says Update, and the program download should continue as expected.

NOTE:

To begin developing your own application, follow these steps:

1.

Download and install a supported IDE:

Code Composer Studio

– Free 16KB IDE: www.ti.com/ccs

IAR Embedded Workbench KickStart

– Free 8KB IDE: www.ti.com/iar-kickstart

2.

Connect the MSP-EXP430F5529 Experimenter Board "eZ-FET" USB to the PC.

3.

Download and debug your application.

15

SLAU330A

– May 2011 – Revised June 2011

MSP-EXP430F5529 Experimenter Board

Submit Documentation Feedback

Copyright

© 2011, Texas Instruments Incorporated