41594B datasheet(111/372 Pages) MICROCHIP

111 / 372 page

 2011-2012 Microchip Technology Inc.

Preliminary

DS41594B-page 111

PIC12LF1840T48A

12.2

PORTA Registers

PORTA is a 6-bit wide, bidirectional port. The

corresponding data direction register is TRISA

(Register 12-3). Setting a TRISA bit (= 1) will make the

corresponding PORTA pin an input (i.e., disable the

output driver). Clearing a TRISA bit (= 0) will make the

corresponding PORTA pin an output (i.e., enables

output driver and puts the contents of the output latch

on the selected pin). The exception is RA3, which is

input only and its TRIS bit will always read as ‘1’.

Example 12-1 shows how to initialize PORTA.

Reading the PORTA register (Register 12-2) reads the

status of the pins, whereas writing to it will write to the

PORT latch. All write operations are read-modify-write

operations. Therefore, a write to a port implies that the

port pins are read, this value is modified and then

written to the PORT data latch (LATA).

The TRISA register (Register 12-3) controls the

PORTA pin output drivers, even when they are being

used as analog inputs. The user should ensure the bits

in the TRISA register are maintained set when using

them as analog inputs. I/O pins configured as analog

input always read ‘0’.

12.2.1

ANSELA REGISTER

The ANSELA register (Register 12-5) is used to

configure the Input mode of an I/O pin to analog.

Setting the appropriate ANSELA bit high will cause all

digital reads on the pin to be read as ‘0’ and allow

analog functions on the pin to operate correctly.

The state of the ANSELA bits has no affect on digital

output functions. A pin with TRIS clear and ANSEL set

will still operate as a digital output, but the Input mode

will be analog. This can cause unexpected behavior

when executing read-modify-write instructions on the

affected port.

EXAMPLE 12-1:

INITIALIZING PORTA

Note:

The ANSELA register must be initialized

to configure an analog channel as a digital

input. Pins configured as analog inputs

will read ‘0’.

BANKSEL PORTA

;

CLRF

PORTA

;Init PORTA

BANKSEL LATA

;Data Latch

CLRF

LATA

;

BANKSEL ANSELA

;

CLRF

ANSELA

;digital I/O

BANKSEL TRISA

;

MOVLW

B'00111000' ;Set RA<5:3> as inputs

MOVWF

TRISA

;and set RA<2:0> as

;outputs

41594B 数据表(PDF) 111 Page - Microchip Technology

41594B 数据表(HTML) 111 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载

链接网址

41594B 数据表(PDF) 111 Page - Microchip Technology

41594B 数据表(HTML) 111 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表 下载

链接网址

数据表下载