L6482 datasheet(21/73 Pages) STMICROELECTRONICS

21 / 73 page

L6482

Functional description

Doc ID 023768 Rev 2

21/73

6.4.1

Automatic Full-step and Boost modes

When motor speed is greater than a programmable full-step speed threshold, the L6482

switches automatically to Full-step mode; the driving mode returns to microstepping when

motor speed decreases below the full-step speed threshold.

The switching between the microstepping and Full-step mode and vice versa is always

performed at an electrical position multiple of

π/4 (Figure 6 and Figure 7).

Full-step speed threshold is set through the related parameter in the FS_SPD register

(Section 9.1.9).

When the BOOST_MODE bit of the FS_SPD register is low (default), the amplitude of the

voltage squarewave in Full-step mode is equal to the peak of the voltage sinewave multiplied

by sine(

π/4) (Figure 6). This avoids the current drop between the two driving modes.

When the BOOST_MODE bit of the FS_SPD register is high, the amplitude of the voltage

squarewave in Full-step mode is equal to the peak of the voltage sinewave (Figure 7). That

improves the output current increasing the maximum motor torque.

Figure 6.

Automatic Full-step switching in Normal mode

Phase A

Phase B

(2N+1) x

π /4

(2N+1) x

π /4

Full-Step

Microstepping

peak

sin(

π /4)x V

peak

AM15036v1

L6482 数据表(PDF) 21 Page - STMicroelectronics

L6482 数据表(HTML) 21 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73

数据表下载