| 数据搜索系统,热门电子元器件搜索 |
|
L6482 数据表(PDF) 35 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
L6482 数据表(HTML) 35 Page - STMicroelectronics |
|
35 / 73 page ![]() L6482 Phase current control Doc ID 023768 Rev 2 35/73 7 Phase current control The L6482 performs a new current control technique, named predictive current control, allowing the device to obtain the target average phase current. This method is described in detail in Section 7.1. Furthermore, the L6482 automatically selects the better decay mode in order to follow the current profile. Current control algorithm parameters can be programmed by T_FAST, TON_MIN, TOFF_MIN and CONFIG registers (see Section 9.1.11, 9.1.12, 9.1.13 and 9.1.20 for details). Different current amplitude can be set for acceleration, deceleration and constant speed phases and when the motor is stopped through TVAL_ACC, TVAL_DEC, TVAL_RUN and TVAL_HOLD registers (see Section 9.1.10). The output current amplitude can also be regulated by the ADCIN voltage value (see Section 7.4). Each bridge is driven by an independent control system that shares with the other bridge the control parameters only. 7.1 Predictive current control Unlike classical peak current control systems, that make the phase current decay when the target value is reached, this new method keeps the power bridge ON for an extra time after reaching the current threshold. At each cycle the system measures the time required to reach the target current (tSENSE). After that the power stage is kept in a “predictive” ON state (tPRED) for a time equal to the mean value of tSENSE in the last two control cycles (actual one and previous one), as shown in Figure 17. Figure 17. Predictive current control At the end of the predictive ON state the power stage is set in OFF state for a fixed time, as in a constant tOFF current control. During the OFF state both slow and fast decay can be performed; the better decay combination is automatically selected by the L6482, as described in Section 7.2. predictive ON state OFF state t SENSE (n-1) t OFF tOFF t PRED (n) = t SENSE (n-1) + tSENSE(n) 2 Iref Iout t PRED (n-1) t SENSE (n) t PRED (n) AM15048v1 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |