LSM303DLHC datasheet(31/42 Pages) STMICROELECTRONICS

31 / 42 page

LSM303DLHC

Doc ID 018771 Rev 1

31/42

Interrupt 1 source register. Read only register.

Reading at this address clears the INT1_SRC IA bit (and the interrupt signal on the INT 1

pin) and allows the refreshing of data in the INT1_SRC register if the latched option was

chosen.

7.1.16

INT1_THS_A (32h)

7.1.17

INT1_DURATION_A (33h)

D6 - D0 bits set the minimum duration of the Interrupt 1 event to be recognized. Duration

steps and maximum values depend on the ODR chosen.

7.1.18

INT2_CFG_A (34h)

Y low. Default value: 0

(0: no interrupt, 1: Y low event has occurred)

X high. Default value: 0

(0: no interrupt, 1: X high event has occurred)

X low. Default value: 0

(0: no interrupt, 1: X low event has occurred)

Table 44.

INT1_SRC_A description (continued)

Table 45.

INT1_THS_A register

0(1)

This bit must be set to ‘0’ for correct working of the device.

THS6

THS5

THS4

THS3

THS2

THS1

THS0

Table 46.

INT1_THS_A description

THS6 - THS0

Interrupt 1 threshold. Default value: 000 0000

Table 47.

INT1_DURATION_A register

0(1)

This bit must be set to ‘0’ for correct working of the device.

Table 48.

INT1_DURATION_A description

D6 - D0

Duration value. Default value: 000 0000

Table 49.

INT2_CFG_A register

AOI

ZHIE

ZLIE

YHIE

YLIE

XHIE

XLIE

LSM303DLHC 数据表(PDF) 31 Page - STMicroelectronics

LSM303DLHC 数据表(HTML) 31 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42

数据表下载