SLAS191A datasheet(7/86 Pages) TI

7 / 86 page

1–1

1 Getting Started

This chapter provides installation and programming instructions for the starter Kit MSP-STK430x320, and

the evaluation Kits MSP-EVK430x320 and MSP-EVK430x320.

NOTE:

This manual covers both the MSP-STK430x320 and MSP-EVK430x320 kits. The

actual icons and/or windows on the computer screen may differ from those shown

in the book due to software version upgrades.

In this documentation, the term STK/EVK is used interchangeably to represent both kits. The programs used

in this manual are provided in the installation directory ..\stk\examples, or in ..\evk\examples. These

programs demonstrate the user-friendly environment of the MSP430 starter and evaluation kits.

The main difference between the MSP-EVK430x320 and the MSP-EVK430x330, besides the peripheral

blocks, is the memory map. The memory map is described in chapter 2 under Memory Organization.

1.1

Installing the Software

Exit all MS-Windows

 programs prior to loading this software.

The setup program installs all necessary files for running programs on the STK/EVK. The setup program

adds the appropriate program group and icons to the Windows program manager.

To install the software:

Insert MSP430-STK/EVK disk 1 in the floppy drive and run setup.exe.

In the Select Components window, choose the applications to load. The Starter Kit and

Simulation Environment button are the default. Make a choice and select Next.

Choose the desired COM port for the hardware connection. The default is set to COM port 2.

Select the port to be used, then select Next.

Read the licensing agreement and answer the question at the bottom of the screen. If YES is

selected to the licensing agreement, a prompt to close all other applications running in Windows

will appear.

The setup.exe program automatically creates and loads the MSP430-STK/EVK software to the

recommended directory (C:\ADT430), unless otherwise indicated. Choose the directory and

select Next.

Insert Disk 2 when prompted. Select OK when disk 2 is in the floppy drive.

Setup.exe places MSP430 icons in the ADT430 program folder, unless otherwise indicated.

Select Next.

Setup is complete. Please take a moment to fill out and return the registration card to ensure

receiving further software updates.

The ADT430 program folder should contain the following icons: Simulation Environment, Read me SIM,

Help SIM, ASM430 Assembler, Sensor Demo, and UnInstall the STK430 and EVK430 Terminals.

MS-Windows is a trademark of Microsoft Corp.

SLAS191A 数据表(PDF) 7 Page - Texas Instruments

SLAS191A 数据表(HTML) 7 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86

数据表下载