 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
SLAS191A 数据表(PDF) 11 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
SLAS191A 数据表(HTML) 11 Page - Texas Instruments |
|
|
11 / 86 page  1–5 Changing the RS232 interface to another COM port (other than COM2) of a personal computer, requires a change to the COM port assignment in the current version of the terminal emulator. 1.2.3 Programming the Monitor Software Into an Erased EPROM (EVK Only) The following steps are recommended to program the Monitor into an EPROM after it has been erased: 1. Connect the EVK-PCB to the programming adapter. 2. Connect the programming adapter to the PC. 3. Apply the power supply to the programming adapter (not included in the kit). 4. Start the Program Device software and: – select the file mon_140.txt in the STK directory – select with Verify – select EPROM device – select the correct parallel port where the adapter is connected – click on the Program button. For detailed information see the MSP430 Family Programming Adapter Manual. Figure 1–4 shows the pop-up that will appear when programming the Monitor software into an erased EPROM EVK. Figure 1–4. Programming the Device |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
