STM8S005C6T6 datasheet(16/103 Pages) STMICROELECTRONICS

16 / 103 page

Timer

synchronization/

chaining

Ext.

trigger

Complem.

outputs

CAPCOM

channels

Counting

mode

Prescaler

Counter

size

(bits)

Timer

Any power of 2 from

1 to 128

TIM4

Analog-to-digital converter (ADC1)

4.13

The STM8S105xx products contain a 10-bit successive approximation A/D converter (ADC1)

with up to 10 multiplexed input channels and the following main features:

• Input voltage range: 0 to VDDA

• Conversion time: 14 clock cycles

• Single and continuous and buffered continuous conversion modes

• Buffer size (n x 10 bits) where n = number of input channels

• Scan mode for single and continuous conversion of a sequence of channels

• Analog watchdog capability with programmable upper and lower thresholds

• Analog watchdog interrupt

• External trigger input

• Trigger from TIM1 TRGO

• End of conversion (EOC) interrupt

Note: Additional AIN12 analog input is not selectable in ADC scan mode or with analog

watchdog. Values converted from AIN12 are stored only into the ADC_DRH/ADC_DRL

registers.

Communication interfaces

4.14

The following communication interfaces are implemented:

• UART2: Full feature UART, synchronous mode, SPI master mode, Smartcard mode, IrDA

mode, LIN2.1 master/slave capability

• SPI : Full and half-duplex, 8 Mbit/s

• I²C: Up to 400 Kbit/s

UART2

4.14.1

Main features

• One Mbit/s full duplex SCI

• SPI emulation

• High precision baud rate generator

• Smartcard emulation

• IrDA SIR encoder decoder

DocID022186 Rev 3

16/103

STM8S005K6 STM8S005C6

Product overview

STM8S005C6T6 数据表(PDF) 16 Page - STMicroelectronics

STM8S005C6T6 数据表(HTML) 16 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载