| 数据搜索系统,热门电子元器件搜索 |
|
AS3687 数据表(PDF) 6 Page - ams AG |
|
|
|||||||||||||||||||||||||||||
AS3687 数据表(HTML) 6 Page - ams AG |
|
6 / 55 page ![]() AS3687/87XM Datasheet www.austriamicrosystems.com/AS3687 1v3-4 5 - 54 5 Characteristics 5.1 Absolute Maximum Ratings Stresses beyond those listed in Table 1 may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in Section 5 Electrical Characteristics is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Table 1 – Absolute Maximum Ratings Symbol Parameter Min Max Unit Note VIN_HV 15V Pins -0.3 17 V Applicable for high-voltage current sink pins CURR1,CURR2, CURR6 VIN_MV 5V Pins -0.3 7.0 V Applicable for 5V pins VBAT, CURR30-33, CURR33/AUDIO_IN, C1_N, C2_N, C1_P, C2_P, CPOUT, DCDC_FB, DCDC_GATE, CLK, DATA; VIN_LV 3.3V Pins -0.3 5.0 V Applicable for 3.3V pins V2_5; DCDC_SNS IIN Input Pin Current -25 +25 mA At 25ºC, Norm: JEDEC 17 Tstrg Storage Temperature Range -55 125 °C Humidity 5 85 % Non-condensing -2000 2000 V All pins except CURR33/AUDIO_IN VESD Electrostatic Discharge Norm: MIL 883 E Method 3015 -1000 1000 V Pin CURR33/AUDIO_IN VCDM Norm: JEDEC JESD 22-A115-A level A -500 500 V Pt Total Power Dissipation 0.75 W TA = 70 ºC, Tjunc_max = 125ºC TBODY Peak Body Temperature 260 °C T = 20 to 40s, in accordance with IPC/JEDEC J-STD 020. 5.2 Operating Conditions Table 2 – Operating Conditions Symbol Parameter Min Typ Max Unit Note VHV High Voltage 0.0 15.0 V Applicable for high-voltage current sink pins CURR1, CURR2 and CURR6. VBAT Battery Voltage 3.0 3.6 5.5 V VBAT VDDI/F Interface Supply Voltage 1.5 1.8 / 2.8 5.5 V For serial interface pins. V2_5 Voltage on Pin V2_5 2.4 2.5 2.6 V Internally generated TAMB Operating Temperature Range -30 25 85 °C IACTIVE Battery current 70 µA Normal Operating current – see section ‘Operating Modes’; interface active (excluding current of the enabled blocks) ISTANDBY Standby Mode Current 5.8 13 µA Current consumption in standby mode. Only 2.5V regulator on, interface active ISHUTDOWN Shutdown Mode Current 0.1 3 µA interface inactive (CLK and DATA set to 0V) |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |