Specifications

18

19

Specifications

Item

Description

Insulation method

Rated input voltage

Operating voltage range

Rated input current

Input points per common

Min. ON voltage/ON current

Max. OFF voltage/OFF current

Input impedance

Response

time

Operating indicator

Photo-coupler

24 V DC

21.6 to 26.4 V DC

8 points/common (C14, E16) 16 points/common (C30, C60)

(Input power polarity either positive or negative)

Same as above

LED display

OFF

→ ON

ON

→ OFF

*1 Specification at the rated input voltage of 24 V DC, 25

°C.

*2 Please refer to the user manual for Y0 to Y7 of the transistor output type.

6. Transistor Output Specifications

Item

Description

Output type

Rated control capacity (Resistive load)

Output points per common

Response time

Life time

Surge absorber

Operating indicator

1a contact

2 A 250 V AC, 2 A 30 V DC (8 A or less/common)

4 points/common

Approx. 10 ms

Approx. 8 ms

20 million operations or more (Operation frequency 180 times/min)

100,000 operations or more (Operation frequency 20 times/min at the rated control capacity)

None

LED display

Mechanical

Electrical

Item

Description

Insulation method

Output type

Rated loadf voltage

Load voltage allowable range

Max. load current

Max. inrush current

Output points per common

OFF state leakage current

ON state voltage drop

Response time

Voltage range for external power supply

Surge absorber

Operating indicator

Photocoupler

Open collector

NPN type: 5 to 24 V DC, PNP type: 24 V DC

NPN type: 4.75 to 26.4 V DC, PNP type: 21.6 to 26.4 V DC

0.5 A

1.5 A

8 points/common (C14, E16)

8 points/common, 6 points/common (C30, C60, E30)

1

µA or less

0.3 V DC or less

21.6 to 26.4 V DC

Zener diode

LED display

OFF

→ ON

ON

→ OFF

OFF

→ ON

ON

→ OFF

Relay output

Transistor output

Control unit X0 to X7

0.6 ms or less: Normal input

Control unit X8 and after, expansion unit

0.6 ms or less

Control unit X0 to X3

135

µs or less: Nominal input

5

Control unit X4 to X7

135

µs or less: Nominal input

50

Control unit X8 and after, expansion unit

0.6 ms or less

19.2 V/3 mA

2.4 V/1 mA

Approx. 5.1 k

Ω (Control unit X0 to X7)

Approx. 5.6 k

Ω (Control unit X8 and after, expansion unit)

19.2 V/6 mA (Control unit X0 to X3)

19.2 V/3 mA (Control unit X4 and after, expansion unit)

2.4 V/1.3 mA (Control unit X0 to X3)

2.4 V/1 mA (Control unit X4 and after, expansion unit)

Approx. 3 k

Ω (Control unit X0 to X3)

Approx. 5.1 k

Ω (Control unit X4 to X7)

Approx. 5.6 k

Ω (Control unit X8 and after, expansion unit)

Approx. 4.7 mA (Control unit X0 to X7)

Approx 4.3 mA (Control unit X8 and after, expansion unit)

Approx. 8 mA (Control unit X0 to X3)

Approx. 4.7 mA (Control unit X4 to X7)

Approx. 4.3 mA (Control unit X8 and after, expansion unit)

Item

Specifications

3. Controls Specifications

Program method

Control method

Program memory

Program capacity

Operation processing speed

Basic instructions

Applied instructions

External inputs (X)

External outputs (Y)

Internal relay (R)

Special internal relay (R)

Link relay (L)

Timer/counter (T/C)

Data register (DT)

Link data register (LD)

Special data register (DT)

Index register (I0 to ID)

Master control relay (MCR)

Number of labels (LOOP)

Number of differentiations

Number of stepladders

Number of subroutines

Number of interruption programs

Pulse catch input / interrupt input

Periodical interrupt

Potentiometer

Constant scan

Real-time clock

Flash ROM

Battery backup

Battery life (when no power is supplied)

Password

Self-diagnosis function

Comment storage

PLC link function

Rewriting in RUN mode

Relay symbol method

Cyclic operation method

Flash ROM built-in (no battery backup required)

16 ksteps (C14), 32 ksteps (C30, C60)

Basic instruction 0.32

µs/step

111

216

4096 points

192 points

2048 points

Total 1024 points: timer capable of counting (1 ms, 10 ms, 100 ms, 1 s) x 32767

Counter capable of counting 1 to 32767

12285 words (C14), 32765 words (C3R, C60)

256 words

374 words

14 words

256 points

256 labels

Up to program capacity

1000 stages

500 subroutines

Relay output type: 15 programs (14 external, 1 constant)

Transistor output type: 9 programs (8 external, 1 constant)

Built-in (Transistor output): single-phase 8 ch (50 kHz x 4 ch + 10 kHz x 4 ch)

Built-in (Relay output): single-phase 8 ch (10 kHz x 8 ch)

Pulse I/O cassette (AFPX-PLS) for relay output type: single-phase 2 ch (80 kHz x 2 ch)

Built-in (Transistor output): 100 kHz x 2 ch + 20 kHz x 2 ch

Pulse I/O cassette (AFPX-PLS) for relay output type: One unit (one axis) 100 kHz, or two units (two axes) 80 kHz

Relay output type: Total 14 points (including the high-speed counter)

Transistor output type: Total 8 points (including the high-speed counter)

0.5 ms to 30 s

2 points (0 to 1000) (C14, C30) 4 points (0 to 1000) (C60)

Possible

Data register (32765 words)

Counter 16 points (1008 to 1023), Internal relay 128 points (R2470 to R255F), Data register 55 words

Before installing AFPX-MRTC

C14: 1230 days (actual operation 10 years at 25

°C)

C30, C60: 990 days (actual operation 10 years at 25

°C)

After installing AFPX-MRTC

C14: 780 days (actual operation 10 years at 25

°C)

C30, C60: 680 days (actual operation 10 years at 25

°C)

(More than two batteries can be installed in C30 and C60. In this case, the battery life is extended several times)

Capable (4 or 8 characters selectable)

Watch dog timer, program syntax check

Capable (328 KB) (backup battery not required)

Max 16 units, link relay 1024 points, link register 128 words (No data transfer or remote programming)

Capable

Backup by F12, P13 commands

Auto-backup at power failure

*4 The actual usable number of points is restricted by the hardware.

*5 Specification at the rated input voltage of 24 V DC, 25

°C. Frequency may be lower due to the voltage and temperature.

*6 Max frequency may vary by the method of operation. Please refer to the manual for details.

*7 Calendar accuracy at 0

°C: 119 sec/month or less, 25°C: 51 sec/month or less, 55°C: 148 sec/month or less (Real-time clock requires a battery.)

*8 When data is stored in the storage area while the battery is not installed, the data is not cleared and the data value may be indefinite.

The same condition occurs when the battery is exhausted.

*9 The number of possible rewrites is 10,000 or less.