| 数据搜索系统,热门电子元器件搜索 |
|
MAS3690CD 数据表(PDF) 16 Page - Dynex Semiconductor |
|
|
|||||||||||||||||||||||||||||
MAS3690CD 数据表(HTML) 16 Page - Dynex Semiconductor |
|
16 / 41 page ![]() MA3690/1/3 16/41 Subgroup Definition 1 Static characteristics specified in Figure 11 at +25 °C 2 Static characteristics specified in Figure 11 at +125 °C 3 Static characteristics specified in Figure 11 at -55 °C 7 Functional characteristics specified at +25 °C 8a Functional characteristics specified at +125 °C 8b Functional characteristics specified at -55 °C 9 Switching characteristics specified in Figure 12 at +25 °C 10 Switching characteristics specified in Figure 12 at +125 °C 11 Switching characteristics specified in Figure 12 at -55 °C DC CHARACTERISTICS AND RATINGS Parameter Min Max Units Supply Voltage -0.5 7 V Input Voltage -0.3 VDD+0.3 V Operating Temperature -55 125 °C Storage Temperature -65 150 °C Note: Stresses above those listed may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these conditions, or at any other condition above those indicated in the operations section of this specification, is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Figure 10: Absolute Maximum Ratings Total dose radiation not exceeding 3x10 5 Rad(SI) Symbol Parameter Conditions Min Typ Max Units VDD Supply Voltage - 4.5 5.0 5.5 V VIH1 TTL Input High Voltage - 2.0 - - V VIL1 TTL Input Low Voltage - - - 0.8 V VIH2 CMOS Input High Voltage - 3.5 - - V VIL2 CMOS Input Low Voltage - - - 1.5 V VOH1 TTL Output High Voltage IOH = -1mA VDD-0.4 - - V VOL1 TTL Output Low Voltage IOL = 2mA - - 0.4 V VOH2 CMOS Output High Voltage IOH = -1mA VDD-0.4 - - V VOL2 CMOS Output Low Voltage IOL = 2mA - - 0.4 V IIL1 Input Low Current VIN = VSS (Note 1) - - -10 µA IIH1 Input High Current VIN = VDD (Note 1) - - 10 µA IIL2 Input Low Current (RT1) VIN = VSS (Note 1) - - -50 µA IIH2 Input High Current (RT2) VIN = VDD (Note 1) 50 - 150 µA IOZL IO Low Current VIN = VSS (Note 1) - - -50 µA IOZH IO High Current VIN = VDD (Note 1) - - 50 µA IDD Power Supply Current - - - 25 mA VDD = 5V±10%, over full operating temperature range. Note 1: Guaranteed but not tested at -55 °C Mil-Std-883, method 5005, subgroups 1, 2, 3 Figure 11: Electrical Characteristics Figure 9: Definition of Subgroups |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |